Hi.
Some days ago I install 4.2 on IBM machine (not so new PIII hardware).
At first booting system freeze on "iic at piixpm". I do "disable iic"
after boot -c.
So I comment out #iic* at piixpm? in GENERIC and rebuild it.
Here is dmesg (yes, yes not GENERIC, as described, but I can boot with
original and do some...), what can I do to get 'iic' worked?
OpenBSD 4.2 (GENERIC) #0: Fri Mar 28 20:25:34 YEKT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class) 700 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073274880 (1023MB)
avail mem = 1030172672 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/28/04, BIOS32 rev. 0 @ 0xfd591
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xcd800/0x3400
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x21
pci1 at pchb0 bus 1
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x00
pci2 at pchb2 bus 2
ips0 at pci2 dev 5 function 0 "IBM ServeRAID" rev 0x00: irq 10
ips0: Morpheus, firmware 7.10.18, bootblock 7.10.18, 64 CCBs, 1 units
scsibus0 at ips0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <IBM, ServeRAID RAID5, > SCSI2 0/direct fixed
sd0: 52071MB, 6638 cyl, 255 head, 63 sec, 512 bytes/sec, 106641408 sec total
fxp0 at pci2 dev 6 function 0 "Intel 8255x" rev 0x08, i82559: irq 11,
address 00:90:27:42:6d:73
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x00
ahc0 at pci0 dev 1 function 0 "Adaptec AIC-7896/7 U2" rev 0x00: irq 10
scsibus1 at ahc0: 16 targets
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
sd1 at scsibus1 targ 0 lun 0: <IBM-ESXS, ST336605LC !#, B246> SCSI3
0/direct fixed
sd1: 34715MB, 29550 cyl, 4 head, 601 sec, 512 bytes/sec, 71096640 sec total
ahc0: target 1 using 8bit transfers
ahc0: target 1 using asynchronous transfers
sd2 at scsibus1 targ 1 lun 0: <IBM-ESXS, ST318305LC !#, B246> SCSI3
0/direct fixed
sd2: 17357MB, 29550 cyl, 2 head, 601 sec, 512 bytes/sec, 35548320 sec total
ahc0: target 2 using 8bit transfers
ahc0: target 2 using asynchronous transfers
sd3 at scsibus1 targ 2 lun 0: <IBM-ESXS, ST318307LC F, B25H> SCSI3
0/direct fixed
sd3: 17357MB, 49855 cyl, 2 head, 356 sec, 512 bytes/sec, 35548320 sec total
ahc1 at pci0 dev 1 function 1 "Adaptec AIC-7896/7 U2" rev 0x00: irq 10
scsibus2 at ahc1: 16 targets
safte0 at scsibus2 targ 9 lun 0: <IBM, AuSbV1S2, 0> SCSI2 3/processor fixed
pcn0 at pci0 dev 5 function 0 "AMD 79c970 PCnet-PCI" rev 0x44,
Am79c975, rev 4: irq 11, address 00:06:29:55:8c:ce
ukphy0 at pcn0 phy 30: Generic IEEE 802.3u media interface, rev. 0:
OUI 0x00001a, model 0x0036
vga1 at pci0 dev 6 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4f: polling
iic at piixpm0 not configured
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <LITEON, CD-ROM LTN486S, YUS3> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
couldn't establish interrupt at irq 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e765 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x83
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 40.0MHz, offset = 0x3f
dkcsum: sd1 matches BIOS drive 0x80
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 40.0MHz, offset = 0x3f
dkcsum: sd2 matches BIOS drive 0x81
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 40.0MHz, offset = 0x3f
dkcsum: sd3 matches BIOS drive 0x82
root on sd1a swap on sd1b dump on sd1b
--
engineer
