So, I've tried both 4.2 and 4.3 snapshot on this slightly aged proliant I've
obtained, and most things have worked very well but for the total
absense of any sensor information.
Is this because a) I've not done something terribly important that
would enable it for me, b) because all the sensor stuff is hidden
behind something like ACPI which isn't working on this machine or c)
because there is no driver for the bit of hardware that handles all
the sensor data?
The various bits of server firmware and the bios have been updated to
the most recent version, and the BIOS has been set up to boot as 'linux'.
It currently looks like my only hope is to give up and use something
like Centos 4 instead, but I'd rather not have to.
Dmesg for a recent 4.3 snapshot. I also have MP and 4.2 dmesgs if
they're likely to prove useful, which I assume they won't.
----------
OpenBSD 4.3 (GENERIC) #695: Tue Mar 4 14:28:56 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU - S 1400MHz ("GenuineIntel"
686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1341730816 (1279MB)
avail mem = 1287774208 (1228MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xec000 (38 entries)
bios0: vendor Compaq version "P24" date 05/01/2004
bios0: Compaq ProLiant DL380 G2
acpi0 at bios0: rev 0, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
ppb0 at pci1 dev 3 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb0 bus 2
vga1 at pci2 dev 0 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci2 dev 1 function 0 not configured
vendor "Compaq", unknown product 0x005a (class memory subclass
miscellaneous, rev 0x00) at pci2 dev 2 function 0 not configured
vendor "Compaq", unknown product 0x00b1 (class memory subclass
miscellaneous, rev 0x01) at pci2 dev 4 function 0 not configured
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci3 at pchb3 bus 7
"Compaq PCI Hotplug" rev 0x12 at pci3 dev 7 function 0 not configured
ciss0 at pci0 dev 1 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: irq 3
ciss0: 1 LD, HW rev 1, FW 2.62/2.62
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.62> SCSI0
0/direct fixed
sd0: 34719MB, 4426 cyl, 255 head, 63 sec, 512 bytes/sec, 71106240 sec total
fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: irq 5,
address 00:08:02:58:58:9c
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 7,
address 00:08:02:58:58:9b
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM SN-124, N104> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d netmask efed ttymask ffef
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
