Hi All,
4.3 works fine on my Notebook except for the thing mentioned in
$subject. These problems also exist with 4.2.
The freeze occurs w/ ACPI enabled when bringing up ral0. Disabling ACPI
solves the freeze problem, but ral0 has difficulties associating with my
Netgear WGT624-v3 WLAN router. It can take 5 minutes or longer to
establish a connection with the router. This makes wlan unusable.
Enabling debug on ral0 remedies the problem, ral0 associates in less
than a minute and is quite usable then. Looks like a race condition or
timing problem.
************************** DMESG with ACPI *************************
OpenBSD 4.3 (GENERIC) #695: Tue Mar 4 14:28:56 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class)
1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 1064726528 (1015MB)
avail mem = 1021480960 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/06, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf9bb0 (15 entries)
bios0: vendor American Megatrends Inc. version "A1522IMS V1.10 08/10/06"
date 08/10/2006
bios0: MICRO-STAR INT'L CO.,LTD. MS-1016
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB MCFG SSDT
acpi0: wakeup devices LAN_(S0) USB1(S0) USB2(S0) USB3(S0) USB4(S0)
EUSB(S0) AUDI(S0) MC97(S0) P0P1(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C3, C2, C1
acpitz0 at acpi0: critical temperature 99 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "MS-1016
" serial
type LION
oem "MSI Corp.
"
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 10
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 15
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
ehci0: reset timeout
ehci0: init failed, error=13
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci2 at ppb1 bus 3
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 6, address
00:16:17:51:e0:5a
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 5 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x21: irq 5
sdhc0 at pci2 dev 5 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x01: irq 5
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci2 dev 5 function 3 not configured
"O2 Micro Firewire" rev 0x02 at pci2 dev 5 function 4 not configured
ral0 at pci2 dev 9 function 0 "Ralink RT2561" rev 0x00: irq 7, address
00:13:d3:83:1a:d2
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x04: irq 7,
ICH6 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801FB Modem" rev 0x04 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH PL>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4082N, CB03> SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
uhci0: controller did not reset
uhci0: cannot start
uhci0: init failed, error=13
uhci1: controller did not reset
uhci1: cannot start
uhci1: init failed, error=13
uhci2: controller did not reset
uhci2: cannot start
uhci2: init failed, error=13
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e93d netmask e9fd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
************************ DMESG without ACPI ***************************
OpenBSD 4.3 (GENERIC) #695: Tue Mar 4 14:28:56 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class)
1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 1064726528 (1015MB)
avail mem = 1021480960 (974MB)
User Kernel Config
UKC> disable acpi
417 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/06, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf9bb0 (15 entries)
bios0: vendor American Megatrends Inc. version "A1522IMS V1.10 08/10/06"
date 08/10/2006
bios0: MICRO-STAR INT'L CO.,LTD. MS-1016
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf45d0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 10
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 15
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci2 at ppb1 bus 3
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 6, address
00:16:17:51:e0:5a
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 5 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x21: irq 5
sdhc0 at pci2 dev 5 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x01: irq 5
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci2 dev 5 function 3 not configured
"O2 Micro Firewire" rev 0x02 at pci2 dev 5 function 4 not configured
ral0 at pci2 dev 9 function 0 "Ralink RT2561" rev 0x00: irq 7, address
00:13:d3:83:1a:d2
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x04: irq 7,
ICH6 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
"Intel 82801FB Modem" rev 0x04 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH PL>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4082N, CB03> SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 7
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ebbd netmask ebfd ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB
RECEIVER" rev 1.10/25.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
ral0: begin active scan
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6 mode 11g
ral0: received beacon from 00:15:0c:67:a0:fb rssi 106 mode 11g
ral0: received beacon from 00:15:0c:67:a0:fb rssi 106 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11 mode 11g
ral0: received probe_resp from 00:14:6c:1b:7c:b6 rssi 110 mode 11g
ral0: received beacon from 00:14:6c:1b:7c:b6 rssi 110 mode 11g
ral0: received beacon from 00:14:6c:1b:7c:b6 rssi 110 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 14 mode 11g
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1 mode 11g
ral0: end active scan
ral0: sending auth to 00:14:6c:1b:7c:b6 on channel 11 mode 11g
ral0: received auth from 00:14:6c:1b:7c:b6 rssi 109 mode 11g
ral0: sending assoc_req to 00:14:6c:1b:7c:b6 on channel 11 mode 11g
ral0: received assoc_resp from 00:14:6c:1b:7c:b6 rssi 110 mode 11g
ral0: set STA link state UP
ral0: associated with 00:14:6c:1b:7c:b6 ssid "4984703" channel 11 start
36Mb long preamble long slot time protection enabled
ral0: received assoc_resp from 00:14:1a:d2:00:14 rssi 109 mode 11g
*** Inserting and trying to configure a Netgear WG511U PCMCIA ath(4) **
ath0 at cardbus0 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 5
ath0: AR5213 5.9 phy 4.3 rf5112a 3.6, FCC2A*, address 00:0f:b5:3e:33:22
ath0: unable to reset hardware; hal status 63
ath0: unable to reset hardware; hal status 1
**********************************************************************
Taking a closer look at the dmesg's now, i also notice that enabling
ACPI also causes problems with USB and audio.
I haven't had time to test audio without ACPI yet.
Asides from the above, OpenBSD works fine, thanks for that great OS :-)
-Heinrich
