Hi,
this is my first attemp to installa OpenBSD on a system...
I have an Epia PD mini-itx system
(http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=241)
with a Intel PCI ethernet card
(Intel PRO/1000MT Dual Port Server Adapter - PWLA8492MT)
when I try to install OpenBSD 4.2 the system freeze (well... it seems to
freeze: ctrl-c has no effect, every keypress is printed to the screen
without result, after 2 minutes I belive that the system is frozen)...
the installation stop during the network configuration after i have
entered the IPv4 address for em1 (the system has 4 ethernet port: vr0,
vr1, em0, em1)...
I was able to install the system without network configuration!!! so I
have an OpenBSD 4.2 installation but if I try to bring the ethernet
interface up the system freezes (only with em0 or em1)...
I do not know how to solve the problem... I have not found usefull
information on the mailing list (there was some problem with this
ethernet adapter near 2006 with a past OpenBSD version)... I have search
into the bug track without result...
someone can tell me where can I search for a solution or what to do?
thanks...

-Massimiliano

I have read that the dmesg of the system is usefull:

>> OpenBSD/i386 BOOT 3.01
boot> boot
booting hd0a:/bsd: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120
m
[ using 563904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 602 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem  = 519602176 (495MB)
avail mem = 494755840 (471MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/11/04, BIOS32 rev. 0 @ 0xface0,
SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
03/11/2004
bios0: VIA Technologies, Inc. VT8623-8235
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdba4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb10/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 9 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xe000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at
0xe0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 12,
address 00:40:63:de:4f:6c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI
0x004063, model 0x0034
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 9
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS721080G9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0B11> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 9
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
00:40:63:de:4f:8a
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
em0 at pci0 dev 19 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: irq
12, address 00:07:e9:1f:9f:46
em1 at pci0 dev 19 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: irq
11, address 00:07:e9:1f:9f:47
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x0, WDG not activated
viasio1 at isa0 port 0x4e/2: VT1211 rev 0x02, HM not activated, WDG not
activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
biomask ff45 netmask ff45 ttymask ffc7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
wd0a: aborted command, interface CRC error reading fsbn 135040 of
135040-135071 (wd0 bn 78773215; cn 4903 tn 103 sn 31), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0a: aborted command, interface CRC error reading fsbn 135040 of
135040-135071 (wd0 bn 78773215; cn 4903 tn 103 sn 31), retrying
wd0: soft error (corrected)
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0h: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
setting tty flags
kbd: keyboard mapping set to us
starting network
starting system logger
starting initial daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Mar  4 12:09:31 CET 2008

Reply via email to