On 01.03-00:39, Alexey Vatchenko wrote: [ ... ] > No, i don't use same network address for two networks.
then you need to alter you settings to specify the actual networks that you're using. for example, you could define the remote network to be 192.168.123.123/32 and then route everything for 192.168.0.0/16 through the tunnel. if you define a home network (like 192.168.123.0/24) then you'll need the bypass rule to avoid routing that through the tunnel. the fact that the tunnel end point moves is irrelevant but you will need to define a local network alias within the home network (i.e. 192.168.123.123 or something) so that the system knows to route that traffice through the tunnel. for routing you only need to define a route to the office gw system (e.g. 192.168.111.111) for the entire 192.168/16 space . note, if your networks don't overlap (i.e. 192.168.123/24 and 192.168.111/24) then you won't need the bypass rule.
