Hello again,
On 25/02/2008, Stuart Henderson <[EMAIL PROTECTED]> wrote:
>
> On 2008-02-25, openbsd firewall <[EMAIL PROTECTED]> wrote:
> > I'm trying to build an OpenBSD pf cluster using 6 interfaces, 2 Intel
> 1000
> > onboard with chipset 82547GI, and a quad port Intel 1000 nic (PCI-X)
> with
> > chipset 82546GB.
> > Trying to ping the switch connected to one of the quad ports gives me
> the
> > following terrible results:
>
> > round-trip min/avg/max/std-dev = 1.822/43.125/161.863/34.999 ms
>
>
> First thing to try is 4.3-beta (in the snapshots dir on your local
> ftp.openbsd.org mirror).
>
>
Installed 4.3-beta and no good. Still have huge ping delays.
39 packets transmitted, 39 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 1.408/64.221/278.094/59.537 ms
I have installed Linux in the other node to sort out any hardware problems
and things look a bit better, altough far from perfect.
25 packets transmitted, 25 received, 0% packet loss, time 24008ms
rtt min/avg/max/mdev = 1.250/6.212/43.861/11.269 ms
Where could be the source of this ? IRQ conflict or driver problems with
that PCI-X slot ?
Thanks,
John
dmesg output:
OpenBSD 4.3-beta (GENERIC) #665: Mon Feb 25 12:14:26 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 4024909824 (3838MB)
avail mem = 3912945664 (3731MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/27/04, BIOS32 rev. 0 @ 0xfb830,
SMBIOS rev. 2.3 @ 0xf0800 (44 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 07/27/2004
bios0: Supermicro P4SCT
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf64
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 3 4 7 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 7,
address 00:30:48:80:af:64
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci3 at ppb2 bus 3
em1 at pci3 dev 4 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03: irq
11, address 00:1b:21:10:0e:2c
em2 at pci3 dev 4 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03: irq
4, address 00:1b:21:10:0e:2d
em3 at pci3 dev 6 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03: irq
7, address 00:1b:21:10:0e:2e
em4 at pci3 dev 6 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03: irq
3, address 00:1b:21:10:0e:2f
"Marvell 88SX5041 SATA" rev 0x03 at pci2 dev 4 function 0 not configured
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci4 at ppb3 bus 4
vga1 at pci4 dev 9 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em5 at pci4 dev 10 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 3,
address 00:30:48:80:af:65
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 7 for native-PCI interrupt
wd0 at pciide1 channel 1 drive 0: <HDS722525VLSA80>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: irq 4
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM ECC PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM ECC PC2700CL2.5
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM ECC PC2700CL2.5
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC2700CL2.5
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f7f5 netmask fffd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
