Hi,
Today I compile the current Kernel and the bsd.mp works fine in my Intel
CoreQuad 6600 (2.4Ghz)
Its great :-D
Diego Fernando Nieto Moreno
---------------------------
www.compumundohypermegared.org
Comunidad de Usuarios OpenBSD Colombia,
the dmesg is:
OpenBSD 4.2-current (GENERIC.MP) #0: Sun Feb 17 14:54:49 COT 2008
[EMAIL PROTECTED]:/usr/src.cur/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2128158720 (2029MB)
avail mem = 2049839104 (1954MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/02/07, SMBIOS rev. 2.4 @ 0xe33a0 (35
entries)
bios0: vendor Intel Corp. version "DPP3510J.86A.0216.2007.0502.1916" date
05/02/2007
bios0: Intel Corporation DG33FB
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) ECIR(S4) UAR1(S4) ILAN(S4) PEGP(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3)
UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
2.41 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
2.41 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
2.41 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus 2 (PEX0)
acpiprt3 at acpi0: bus 3 (PEX1)
acpiprt4 at acpi0: bus 4 (PEX2)
acpiprt5 at acpi0: bus 5 (PEX3)
acpiprt6 at acpi0: bus 6 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: C1, FVS, 2394, 1596 MHz
acpicpu1 at acpi0: C1, FVS, 2394, 1596 MHz
acpicpu2 at acpi0: C1, FVS, 2394, 1596 MHz
acpicpu3 at acpi0: C1, FVS, 2394, 1596 MHz
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xec00 0xcf000/0x1000 0xd0000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq
255)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82G33 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
"Intel ICH9 IGP C" rev 0x02 at pci0 dev 25 function 0 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 18 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 (irq
11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 17 (irq
9)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 17 (irq
9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 4 int
22 (irq 10)
azalia0: codec[s]: Realtek/0x0888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 (irq
255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 4 int 20 (irq
255)
pci3 at ppb2 bus 3
pciide0 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 4 int 17 (irq 9) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4165B, DL03> SCSI0 5/cdrom
removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 int 18 (irq
255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 4 int 19 (irq
255)
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 (irq
255)
pci6 at ppb5 bus 6
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 (irq
11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 (irq
11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci7 at ppb6 bus 7
vr0 at pci7 dev 0 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 21 (irq
11), address 00:08:54:3a:9e:20
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063,
model 0x0034
bktr0 at pci7 dev 1 function 0 "Brooktree BT878" rev 0x11: apic 4 int 22 (irq
10)
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner.
radio0 at bktr0
"Brooktree BT878 Audio" rev 0x11 at pci7 dev 1 function 1 not configured
acx0 at pci7 dev 2 function 0 "TI ACX111" rev 0x00: apic 4 int 18 (irq 10)
acx0: ACX111, radio Radia (0x16), EEPROM ver 5, address 00:18:e7:00:3d:7c
"TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IH LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 21 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD501LJ>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD501LJ>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 4 int 21 (irq 11) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
