I have an Intel D815EEA2 motherboard; its spec is supposed to include
the RNG hardware; however, the dmesg output is void of any indication
that obsd discovered or uses it.
Is there something I need to do?
Thanks,
# ---
rebooting...
OpenBSD 4.2 (GENERIC) #2: Sat Feb 2 13:34:39 EST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 535130112 (510MB)
avail mem = 510345216 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/06/02, BIOS32 rev. 0 @ 0xfda74,
SMBIOS rev. 2.3 @ 0xf1090 (58 entries)
bios0: vendor Intel Corp. version "EA81520A.86A.0039.P21.0211061753"
date 11/06/2002
bios0: Intel Corporation D815EEA2
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2a10/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: PBTN
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02: aperture
at 0xf8000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x01, i82562: irq 4,
address 00:03:47:8a:7e:4f
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
em0 at pci1 dev 9 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
7, address 00:04:23:a6:82:64
em1 at pci1 dev 9 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
3, address 00:04:23:a6:82:65
em2 at pci1 dev 13 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
7, address 00:04:23:a5:97:10
em3 at pci1 dev 13 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
3, address 00:04:23:a5:97:11
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <LEXAR ATA FLASH>
wd0: 4-sector PIO, LBA, 246MB, 503808 sectors
wd0(pciide0:0:0): using PIO mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:28D, 3.03> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 10
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x02: irq 6
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: adm1025
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x02: irq 9
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x02: irq 6,
ICH2 AC97
ac97: codec id 0x41445360 (Analog Devices AD1885)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
biomask ff65 netmask fffd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 2: Texas Instruments TUSB2046 hub, rev 1.10/1.25,
addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 3
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
[EMAIL PROTECTED]:~ (0)#
# ---
