On Mon, 21 Jan 2008 21:50:42 +0700, Stuart Henderson <[EMAIL PROTECTED]>
wrote:
On 2008/01/21 21:36, Insan Praja SW wrote:
Currently I'm setting up ibgp session between quagga and openbgpd, I got
it up, but it seem no route injected to the fib, when I traced to an
address learned from quagga, it still choose default route and using
"bgpctl fib couple" and "bgpctl -n reload" is not changing anything. If
upgrading to -current will solved this, then it's do-able.
I appreciated any input to this matter.
How are your nexthops? (bgpctl sh nex)
Like this,
GreenOfficeBorder# bgpctl -n show next
Nexthop State
202.149.93.9 valid vlan2 UP, Ethernet, active, 100 MBit/s
202.149.93.5 valid vlan2 UP, Ethernet, active, 100 MBit/s
202.149.93.4 valid vlan2 UP, Ethernet, active, 100 MBit/s
202.149.93.3 valid vlan2 UP, Ethernet, active, 100 MBit/s
202.149.93.1 valid vlan2 UP, Ethernet, active, 100 MBit/s
202.149.94.255 valid
202.149.94.233 valid
202.149.94.232 valid
202.149.94.229 valid
202.149.94.169 valid
Thanks,
Insan
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
