hello,
I'm running OBSD 4.2 on a Axiomtek NA-1531. It's a network appliance
with 3 Intel 100 MB fxp adapters, an Intel PRO/1000CT and an Intel quad
PRO/1000MT.
The problem is with the PRO/1000MT. Other interfaces works fine.
Network traffic on quad 1000MT is slow, very slow, and the following
message is regularly displayed on the console :
em1: watchdog timeout -- resetting
After searching the list, I merged the -current branch em driver into
the 4_2 stable branch and applied the following patch,
http://article.gmane.org/gmane.os.openbsd.tech/14134.
PCIX is "only" 66 MHz.
Nothing changed.
Any idea ?
Thanks for your help.
The following logs are from the GENERIC kernel.
Jan 16 18:25:43 pongo /bsd: OpenBSD 4.2 (GENERIC) #375: Tue Aug 28
10:38:44 MDT 2007
Jan 16 18:25:43 pongo /bsd:
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Jan 16 18:25:43 pongo /bsd: cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz
("GenuineIntel" 686-class) 3.01 GHz
Jan 16 18:25:43 pongo /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
Jan 16 18:25:43 pongo /bsd: real mem = 536440832 (511MB)
Jan 16 18:25:43 pongo /bsd: avail mem = 511070208 (487MB)
Jan 16 18:25:43 pongo /bsd: mainbus0 at root
Jan 16 18:25:43 pongo /bsd: bios0 at mainbus0: AT/286+ BIOS, date
08/23/05, BIOS32 rev. 0 @ 0xfa6d0
Jan 16 18:25:43 pongo /bsd: apm0 at bios0: Power Management spec V1.2
Jan 16 18:25:43 pongo /bsd: apm0: AC on, battery charge unknown
Jan 16 18:25:43 pongo /bsd: apm0: flags 70102 dobusy 1 doidle 1
Jan 16 18:25:43 pongo /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd094
Jan 16 18:25:43 pongo /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfcfb0/224 (12 entries)
Jan 16 18:25:43 pongo /bsd: pcibios0: PCI Exclusive IRQs: 5 7 10 11 12
Jan 16 18:25:43 pongo /bsd: pcibios0: PCI Interrupt Router at 000:31:0
("Intel 6300ESB LPC" rev 0x00)
Jan 16 18:25:43 pongo /bsd: pcibios0: PCI bus #4 is the last bus
Jan 16 18:25:43 pongo /bsd: cpu0 at mainbus0
Jan 16 18:25:43 pongo /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(no bios)
Jan 16 18:25:43 pongo /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82875P
Host" rev 0x02
Jan 16 18:25:43 pongo /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82875P
AGP" rev 0x02
Jan 16 18:25:43 pongo /bsd: pci1 at ppb0 bus 1
Jan 16 18:25:43 pongo /bsd: ppb1 at pci0 dev 3 function 0 "Intel 82875P
PCI-CSA" rev 0x02
Jan 16 18:25:43 pongo /bsd: pci2 at ppb1 bus 2
Jan 16 18:25:43 pongo /bsd: em0 at pci2 dev 1 function 0 "Intel
PRO/1000CT (82547GI)" rev 0x00: irq 11, address 00:60:e0:e2:62:db
Jan 16 18:25:43 pongo /bsd: ppb2 at pci0 dev 28 function 0 "Intel
6300ESB PCIX" rev 0x02
Jan 16 18:25:43 pongo /bsd: pci3 at ppb2 bus 3
Jan 16 18:25:43 pongo /bsd: em1 at pci3 dev 8 function 0 "Intel
PRO/1000MT (82546GB)" rev 0x03: irq 10, address 00:60:e0:e2:62:dc
Jan 16 18:25:43 pongo /bsd: em2 at pci3 dev 8 function 1 "Intel
PRO/1000MT (82546GB)" rev 0x03: irq 10, address 00:60:e0:e2:62:dd
Jan 16 18:25:43 pongo /bsd: em3 at pci3 dev 10 function 0 "Intel
PRO/1000MT (82546GB)" rev 0x03: irq 10, address 00:60:e0:e2:62:de
Jan 16 18:25:43 pongo /bsd: em4 at pci3 dev 10 function 1 "Intel
PRO/1000MT (82546GB)" rev 0x03: irq 10, address 00:60:e0:e2:62:df
Jan 16 18:25:43 pongo /bsd: uhci0 at pci0 dev 29 function 0 "Intel
6300ESB USB" rev 0x02: irq 10
Jan 16 18:25:43 pongo /bsd: uhci1 at pci0 dev 29 function 1 "Intel
6300ESB USB" rev 0x02: irq 7
Jan 16 18:25:43 pongo /bsd: "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29
function 4 not configured
Jan 16 18:25:43 pongo /bsd: "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29
function 5 not configured
Jan 16 18:25:43 pongo /bsd: ehci0 at pci0 dev 29 function 7 "Intel
6300ESB USB" rev 0x02: irq 5
Jan 16 18:25:43 pongo /bsd: usb0 at ehci0: USB revision 2.0
Jan 16 18:25:43 pongo /bsd: uhub0 at usb0: Intel EHCI root hub, rev
2.00/1.00, addr 1
Jan 16 18:25:43 pongo /bsd: ppb3 at pci0 dev 30 function 0 "Intel
82801BA AGP" rev 0x0a
Jan 16 18:25:43 pongo /bsd: pci4 at ppb3 bus 4
Jan 16 18:25:43 pongo /bsd: fxp0 at pci4 dev 4 function 0 "Intel 8255x"
rev 0x10, i82551: irq 10, address 00:60:e0:e2:62:d8
Jan 16 18:25:43 pongo /bsd: inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
Jan 16 18:25:43 pongo /bsd: fxp1 at pci4 dev 5 function 0 "Intel 8255x"
rev 0x10, i82551: irq 12, address 00:60:e0:e2:62:d9
Jan 16 18:25:43 pongo /bsd: inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
Jan 16 18:25:43 pongo /bsd: fxp2 at pci4 dev 6 function 0 "Intel 8255x"
rev 0x10, i82551: irq 11, address 00:60:e0:e2:62:da
Jan 16 18:25:43 pongo /bsd: inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
Jan 16 18:25:43 pongo /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel
6300ESB LPC" rev 0x02: 24-bit timer at 3579545Hz
Jan 16 18:25:43 pongo /bsd: pciide0 at pci0 dev 31 function 1 "Intel
6300ESB IDE" rev 0x02: DMA, channel 0 configured to compatibility,
channel 1 configured to compatibility
Jan 16 18:25:43 pongo /bsd: pciide0: channel 0 disabled (no drives)
Jan 16 18:25:43 pongo /bsd: wd0 at pciide0 channel 1 drive 0: <Flash Card>
Jan 16 18:25:43 pongo /bsd: wd0: 1-sector PIO, LBA, 500MB, 1025136 sectors
Jan 16 18:25:43 pongo /bsd: wd0(pciide0:1:0): using PIO mode 4, DMA mode 2
Jan 16 18:25:43 pongo /bsd: pciide1 at pci0 dev 31 function 2 "Intel
6300ESB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel
1 configured to native-PCI
Jan 16 18:25:43 pongo /bsd: pciide1: using irq 11 for native-PCI interrupt
Jan 16 18:25:43 pongo /bsd: ichiic0 at pci0 dev 31 function 3 "Intel
6300ESB SMBus" rev 0x02: irq 12
Jan 16 18:25:43 pongo /bsd: iic0 at ichiic0
Jan 16 18:25:43 pongo /bsd: usb1 at uhci0: USB revision 1.0
Jan 16 18:25:43 pongo /bsd: uhub1 at usb1: Intel UHCI root hub, rev
1.00/1.00, addr 1
Jan 16 18:25:43 pongo /bsd: usb2 at uhci1: USB revision 1.0
Jan 16 18:25:43 pongo /bsd: uhub2 at usb2: Intel UHCI root hub, rev 1Jan
16 18:25:43 pongo /bsd: isa0 at ichpcib0
Jan 16 18:25:43 pongo /bsd: isadma0 at isa0
Jan 16 18:25:43 pongo /bsd: pckbc0 at isa0 port 0x60/5
Jan 16 18:25:43 pongo /bsd: pckbd0 at pckbc0 (kbd slot)
Jan 16 18:25:43 pongo /bsd: pckbc0: using irq 1 for kbd slot
Jan 16 18:25:43 pongo /bsd: wskbd0 at pckbd0: console keyboard
Jan 16 18:25:43 pongo /bsd: pcppi0 at isa0 port 0x61
Jan 16 18:25:43 pongo /bsd: midi0 at pcppi0: <PC speaker>
Jan 16 18:25:43 pongo /bsd: spkr0 at pcppi0
Jan 16 18:25:43 pongo /bsd: lm0 at isa0 port 0x290/8: W83627HF
Jan 16 18:25:43 pongo /bsd: npx0 at isa0 port 0xf0/16: reported by
CPUID; using exception 16
Jan 16 18:25:43 pongo /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a,
16 byte fifo
Jan 16 18:25:43 pongo /bsd: pccom0: console
Jan 16 18:25:43 pongo /bsd: pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a,
16 byte fifo
Jan 16 18:25:43 pongo /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Jan 16 18:25:43 pongo /bsd: biomask ffe5 netmask ffe5 ttymask ffe7
Jan 16 18:25:43 pongo /bsd: pctr: user-level cycle counter enabled
Jan 16 18:25:43 pongo /bsd: mtrr: Pentium Pro MTRR support
Jan 16 18:25:43 pongo /bsd: dkcsum: wd0 matches BIOS drive 0x80
Jan 16 18:25:43 pongo /bsd: root on wd0a swap on wd0b dump on wd0b
Jan 16 18:25:43 pongo savecore: /dev/wd0b: Device not configured
.00/1.00, addr 1
Jan 16 18:25:49 pongo /bsd: em2: watchdog timeout -- resetting
Jan 16 18:25:53 pongo /bsd: em1: watchdog timeout -- resetting
