hi all,
i have a shiny new black macbook and openbsd wont install until i build a
new bsd.rd with mp support. afaik acpi is enabled in current but it wont
work for me.
after building the bsd.rd, i could install openbsd as normal and the
orig bsd.mp
kernel boots fine. the bsd (up) kernel stops at:
softraid0 at root
xenocara with vesa dose not work but i hope to get it working.
(EE) VESA(0): No matching modes
any tricks or xorg.conf files are welcome.
regards
tim
OpenBSD 4.2-current (GENERIC.MP) #492: Tue Dec 18 18:52:00 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz ("GenuineIntel"
686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1038225408 (990MB)
avail mem = 995893248 (949MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @
0xe0000 (43 entries)
bios0: vendor Apple Inc. version "MB31.88Z.008D.B00.0710021441" date
10/02/07
bios0: Apple Inc. MacBook3,1
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) ARPT(S3) GIGE(S3) UHC1(S3)
UHC2(S3) UHC3(S3) UHC4(S3) UHC5(S3) EHC1(S3) EHC2(S3) EC__(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz ("GenuineIntel"
686-class) 2.20 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP05)
acpiprt2 at acpi0: bus 3 (RP06)
acpiprt3 at acpi0: bus 4 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "AS" type LI oem "DP"
bios0: ROM list: 0xc0000/0xee00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120b2806000b28
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2200 MHz (1340 mV): speeds: 2200, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x03
agp0 at pchb0: aperture at 0x40000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82965GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2 int
20 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2 int
16 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2 int
21 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
2 int 20 (irq 10)
azalia0: codec[s]: Realtek/0x0885
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 2 int
16 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 2 int
16 (irq 255)
pci2 at ppb1 bus 2
"Broadcom BCM4328" rev 0x03 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x03: apic 2 int
17 (irq 255)
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8058" rev 0x13, Yukon-2
EC Ultra (0x3): apic 2 int 17 (irq 7)
msk0 at mskc0 port A: address 00:1b:63:a7:f1:1c
eephy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2 int
16 (irq 11)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2 int
18 (irq 5)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 2 int
21 (irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2 int
20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci4 at ppb3 bus 4
"AT&T/Lucent FW322 1394" rev 0x61 at pci4 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-857E, ZF1E> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2828
rev 0x03: DMA (unsupported), channel 0 configured to native-PCI, channel
1 configured to native-PCI
pciide1: using apic 2 int 18 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST9160821AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 2
int 20 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 4 "Apple Computer Bluetooth" rev 2.00/0.0c addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Apple Computer ADB
device" rev 2.00/19.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Apple Computer ADB
device" rev 2.00/19.65 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
uhidev2 at uhub6 port 1 configuration 1 interface 0 "Apple Computer,
Inc. IR Receiver" rev 2.00/0.16 addr 2
uhidev2: iclass 3/0, 38 report ids
uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0
uhidev3 at uhub6 port 2 configuration 1 interface 0 "Apple Computer
Apple Internal Keyboard / Trackpad" rev 2.00/0.04 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 modifier keys, 5 key codes, country code 13
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub6 port 2 configuration 1 interface 1 "Apple Computer
Apple Internal Keyboard / Trackpad" rev 2.00/0.04 addr 3
uhidev4: iclass 3/1, 5 report ids
ums1 at uhidev4 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
ums2 at uhidev4 reportid 5
ums2: mouse has no X report
uhidev5 at uhub6 port 2 configuration 1 interface 2 "Apple Computer
Apple Internal Keyboard / Trackpad" rev 2.00/0.04 addr 3
uhidev5: iclass 3/0
uhid3 at uhidev5: input=1, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
