Diego Fernando Nieto Moreno writes: > Hi Joel > > Thanks for the response and your time > >> Try entering the boot config (type '-c' at the boot> >> prompt) and disable the azalia driver > > I made this steps but the Kernel crash again. I type > <code> > boot bsd.mp -c > disable azalia > quit > </code>
Who would tell you to do this, and why? Are you quoting private mail on the lists? > > The screenshot of the kernel crash are: > > http://www.compumundohypermegared.org/wp-content/uploads/2007/12/kernelcrash-17122007.jpg > > http://www.compumundohypermegared.org/wp-content/uploads/2007/12/trace-kernelcrash-17122007.jpg > > Follow the suggestion of Jeff the output of the kernel was: > <code> > vendor "Intel", unknows product 0x29c4 (class comunications subclass > miscellane > ous, rev 0x02) at pci0 dev 3 function 0 not configured > vendor "Intel", unknown product 0x294c (class network subclass ethernet, > rev 0x0 > 2) at pci0 dev 25 function 0 vendor "Intel", unknown product 0x2937 rev > 0x02p > ci_intr_map: bus 0 dev 26 func 0 pin 1; line 10 > pci_intr_mp: no MP mapping found > panic: no isa bus > Stopped at Debugger+0x4: leave > Debugger(0,d08d5c37,64,a,d02ca0b0) at Debugger+0x4 > panic(d07208c9,30310a,d08d5c68,d2964f80,0) at panic+0x63 > isa_intr_establish(0,a,3,50,d02ca0b0,d298d000,d298d014,a) at > isa_imtr_establish > +0x1f3 > > pci_intr_establish(0,8000d000,a,1,0,50,d02ca0b0,d298d000,d298d014,d08d5cf0,d08d > 5d18,d0752224) at pci_intr_establish+0x54 > uhci_pci_attach(d2977f00,d298d000,d08d5d70,d2977f00,8000d000) at > uhci_pci_attac > h+0xf3 > config_attach(d2977f00,d0752224,d08d5d70,d048d5dc) at config_attach+0xfd > pci_probe_device(d2977f00,8000d000,0,0,0) at pci_probe_device+0x147 > pci_enumerate_bus(d2977f00,0,0,d2976fc0,1) at pci_enumerate_bus+0xef > config_attach(d2976fc0,d0751510,d08d5e80,d048d360) at config_attach+0xfd > mainbus_attach(0,d2976fc0,0,e6132000,d08d4330) at mainbus_attach+0x1f7 > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS > PANIC! > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! > ddb{0}> trace > Debugger(0,d08d5c37,64,a,d02ca0b0) at Debugger+0x4 > panic(d07208c9,30310a,d08d5c68,d2964f80,0) at panic+0x63 > isa_intr_establish(0,a,3,50,d02ca0b0,d298d000,d298d014,a) at > isa_intr_establish > +0x1f3 > > pci_intr_establish(0,8000d000,a,1,0,50,d02ca0b0,d298d000,d298d014,d08d5cf0,d08d > 5d18,d0752224) at pci_intr_establish+0x54 > uhci_pci_attach(d2977f00,d298d000,d08d5d70,d2977f00,8000d000) at > uhci_pci_attac > h+0xf3 > config_attach(d2977f00,d0752224,d08d5d70,d048d5dc) at config_attach+0xfd > pci_probe_device(d2977f00,8000d000,0,0,0) at pci_probe_devlice+0x147 > pci_enumerate_bus(d2977f00,0,0,d2976fc0,1) at pci_enumerate_bus+0xef > config_attach(d2976fc0,d0751510,d08d5e80,d048d360) at config_attach+0xfd > mainbus_attach(0,d2976fc0,0,e6132000,d08d4330) at mainbus_attach+0x1f7 > config_attach(0,d07514ec,0,0,d07972a0) at config_attach+0xfd > config_rootfound/d06a5444,0,d08d5f38,d0460686) at config_rootfound+0x27 > cpu_configure(0,1,3,0,6) at cpu_configure+0x29 > main(0,0,0,0,0) at main+0x389 > ddb{0}> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > * 0 -1 0 0 7 0X80200 swapper > </code> > > Diego Fernando Nieto Moreno > --------------------------- > Comunidad de Usuarios OpenBSD Colombia > www.compumundohypermegared.org
