It works in 4.2.
Thanks a lot for your help.
/Joaquin
---------- Forwarded message ----------
From: Joaquin Herrero <[EMAIL PROTECTED]>
Date: 08-nov-2007 15:33
Subject: problems with D-LINK USB PCI Adapter on sparc64
To: misc@openbsd.org
?Anyone has any idea about this...?
Thanks.
Joaqumn.
------------------------------------------------------------
On Nov 5 joakinen wrote...
Hi everybody,
I'm having problems with usb disks on my Sun Ultra 10 desktop. Last week I
bought a D-Link DU-520 5-Port USB 2.0 PCI Ada
pter for this machine. OpenBSD detected it without problems, and detects all
the hardware I plug in this card. The probl
em is that only the "c" partition is shown in disklabel, so I cannot mount
the disks, as no "i" partition shows up.
I give here details about the problem and the dmesg of the machine. Any
comments appreciated.
When I plug an external USB disk this is what is logged on
/var/log/messages:
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Lacie Group. SA Lacie Mobile Drive, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets
sd0 at scsibus3 targ 1 lun 0: <SAMSUNG, MP0804H, 0000> SCSI0 0/direct fixed
sd0: 76351MB, 76351 cyl, 64 head, 32 sec, 512 bytes/sec, 156368016 sec total
This is the disklabel output for that disk:
# disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: MP0804H
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 76351
total sectors: 156368016
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
3 partitions:
# size offset fstype [fsize bsize cpg]
c: 156368016 0 unused 0 0 # Cyl 0 -
76351*
disklabel: warning, partition c: size % cylinder-size != 0
There's no "i" partition, so I cannot mount it. Same happens with any usb
disk I've tried.
For example, this is the log for a usb flash disk:
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: vendor 0x0930 USB Flash Memory, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets
sd0 at scsibus3 targ 1 lun 0: <, USB Flash Memory, 1.00> SCSI2 0/direct
removable
sd0: 978MB, 978 cyl, 64 head, 32 sec, 512 bytes/sec, 2002944 sec total
and this is the disklabel output:
# disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: USB Flash Memory
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 978
total sectors: 2002944
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
3 partitions:
# size offset fstype [fsize bsize cpg]
c: 2002944 0 unused 0 0 # Cyl 0 -
977
In this case there's no warning, but no sd0i partition.
Here is the dmesg:
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org <http://www.openbsd.org/>
OpenBSD 4.1 (GENERIC) #1099: Sat Mar 10 19:18:09 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969736192
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED] ,1/[EMAIL PROTECTED],0/[EMAIL
PROTECTED],0
mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440 MHz, version 0 FPU
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external
(64 b/l)
psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 534c000-53cc000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ipl 37
"SUNW,pll" at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 42
wskbd0 at comkbd0: console keyboard
com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34:
polled
"fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39
not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 35 ipl 36: nvaddrs 0
audio0 at audioce0
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:fe:3f:6c
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1
vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c
wsdisplay0 at vgafb0
wsdisplay0: screen 0 added (std, sun emulation)
pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7e0 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST320420A>
wd0: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB05> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21153 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
"Sun PCIO EBus2" rev 0x01 at pci3 dev 0 function 0 not configured
hme1 at pci3 dev 0 function 1 "Sun HME" rev 0x01: ivec 0x7d1, address
08:00:20:f6:85:94
luphy0 at hme1 phy 1: LU6612 10/100 PHY, rev. 1
"Sun PCIO EBus2" rev 0x01 at pci3 dev 1 function 0 not configured
hme2 at pci3 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7d2, address
08:00:20:f6:85:95
luphy1 at hme2 phy 1: LU6612 10/100 PHY, rev. 1
"Sun PCIO EBus2" rev 0x01 at pci3 dev 2 function 0 not configured
hme3 at pci3 dev 2 function 1 "Sun HME" rev 0x01: ivec 0x7d3, address
08:00:20:f6:85:96
luphy2 at hme3 phy 1: LU6612 10/100 PHY, rev. 1
"Sun PCIO EBus2" rev 0x01 at pci3 dev 3 function 0 not configured
hme4 at pci3 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7d0, address
08:00:20:f6:85:97
luphy3 at hme4 phy 1: LU6612 10/100 PHY, rev. 1
siop0 at pci2 dev 2 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7d4,
using 4K of on-board RAM
scsibus1 at siop0: 16 targets
siop1 at pci2 dev 2 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7d5,
using 4K of on-board RAM
scsibus2 at siop1: 16 targets
ohci0 at pci2 dev 3 function 0 "NEC USB" rev 0x43: ivec 0x7d8, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 3 function 1 "NEC USB" rev 0x43: ivec 0x7d9, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 3 function 2 "NEC USB" rev 0x04: ivec 0x7da
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
creator0 at mainbus0 addr 0xfebc0000: Elite3D, model SUNW,XXX-XXXX, dac 0
wsdisplay1 at creator0: console (std, sun emulation), using wskbd0
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
Thanks.
Joaquin Herrero
--
Joaquin Herrero, jherrero@
perl -le '$_="=6<678428378>12376=2>:02;:19<5>:4"; tr[0->][DREAM.IT KOWSVC];
print'
