There are still interrupt issues on this box. Can you try GENERIC.MP + acpi and send the dmesg?
Thanks, /marco On Mon, Nov 12, 2007 at 11:04:16AM +0100, Koenig, Thomas wrote: > Hi, > > with help form Insan Praja, I able to enable acpi now. > But I have still the same problems with the QuadPort NIC. :( > > My last try was to build on this system a fresh new Kernel from the > current CVS but still the same problem. > > > dmesg from the snapshot from Thu Nov 8: > > OpenBSD 4.2-current (GENERIC) #2: Thu Nov 8 10:46:42 WIT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1069268992 (1019MB) > avail mem = 1026822144 (979MB) > User Kernel Config > UKC> disable apm > UKC> enable acpi > 272 acpi0 enabled > UKC> quit > Continuing... > RTC BIOS diagnostic error f<fixed_disk,invalid_time> > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc1d000 (43 entries) > bios0: vendor Intel Corporation version > "S3000.86B.02.00.0035.111020061326" date 11/10/2006 > bios0: Intel S3000AHLX > acpi0 at mainbus0: rev 0 > acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4) > UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(S4) > acpitimer at acpi0 not configured > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 9 (P32_) > acpiprt2 at acpi0: bus 5 (PEX0) > acpiprt3 at acpi0: bus 6 (PXS1) > acpiprt4 at acpi0: bus -1 (PEX1) > acpiprt5 at acpi0: bus -1 (PEX2) > acpiprt6 at acpi0: bus -1 (PEX3) > acpiprt7 at acpi0: bus 7 (PEX4) > acpiprt8 at acpi0: bus 8 (PEX5) > acpicpu at acpi0 not configured > acpicpu at acpi0 not configured > acpicpu at acpi0 not configured > acpicpu at acpi0 not configured > acpibtn0 at acpi0: SLPB > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2200.25 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 > ,CX16,xTPR,NXE,LONG > cpu0: 2MB 64b/line 8-way L2 cache > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00 > ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci2 at ppb1 bus 2 > ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci3 at ppb2 bus 3 > em0 at pci3 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev > 0x06pci_intr_map: bad interrupt line 128 > : couldn't map interrupt > em0: Allocation of PCI resources failed > em1 at pci3 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev > 0x06pci_intr_map: bad interrupt line 128 > : couldn't map interrupt > em1: Allocation of PCI resources failed > ppb3 at pci2 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci4 at ppb3 bus 4 > em2 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev > 0x06pci_intr_map: bad interrupt line 128 > : couldn't map interrupt > em2: Allocation of PCI resources failed > em3 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev > 0x06pci_intr_map: bad interrupt line 128 > : couldn't map interrupt > em3: Allocation of PCI resources failed > ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 > pci5 at ppb4 bus 5 > ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci6 at ppb5 bus 6 > ppb6 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 > pci7 at ppb6 bus 7 > ppb7 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 > pci8 at ppb7 bus 8 > em4 at pci8 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq > 9, address 00:15:17:29:70:25 > "Intel 82573E AMT" rev 0x03 at pci8 dev 0 function 3 not configured > "Intel 82573E KCS (Active Management)" rev 0x03 at pci8 dev 0 function 4 > not configured > ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 > pci9 at ppb8 bus 9 > vga1 at pci9 dev 4 function 0 "ATI ES1000" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > em5 at pci9 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq > 9, address 00:15:17:29:70:26 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7540A, 1.01> SCSI0 > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using irq 10 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <Hitachi HDS721680PLA380> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10 > iic0 at ichiic0 > adt0 at iic0 addr 0x2e: emc6d100 rev 0x69 > spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM ECC PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM ECC PC2-5300CL5 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a swap on wd0b dump on wd0b > > [demime 1.01d removed an attachment of type application/x-pkcs7-signature > which had a name of smime.p7s]
