hi,
i have similar problem too, my sk(4) autoselect only show 10baseT full
duplex, before upgrade to 4.2 its show 1000baseT full duplex. it also
use eephy*. from this thread i know there's a patch, but how do i apply
the patch without upgrade to current ? just download the diff and re
compile ? or someone else have a better idea ?
here's my copy of dmesg, and pls cc me, i'm not in the list.
thank you.
rgds,
Agung
-----------
OpenBSD 4.2-stable (GENERIC) #5: Tue Nov 6 19:23:37 WIT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,C
NXT-ID,xTPR
real mem = 2146463744 (2047MB)
avail mem = 2067763200 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/29/03, BIOS32 rev. 0 @ 0xfd6e0,
SMBIOS rev. 2.31 @ 0xe3010 (46 entries)
bios0: vendor Phoenix Technologies LTD version
"E7501CW20.86B.0025.P07.0308290925" date 08/29/2003
bios0: Intel Corporation SE7501CW2
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xe3000/0x1000!
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC BOOT SPCR
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SPCR not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (ICH3)
acpiprt2 at acpi0: bus 3 (Z000)
acpiprt3 at acpi0: bus 2 (Z001)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpicpu4 at acpi0
acpicpu5 at acpi0
acpicpu6 at acpi0
acpicpu7 at acpi0
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 1
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 2
bge0 at pci2 dev 2 function 0 "Broadcom BCM5701" rev 0x15, BCM5701 B5
(0x0105): irq 10, address 00:0a:5e:64:8e:14
brgphy0 at bge0 phy 1: BCM5701 10/100/1000baseT PHY, rev. 0
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
"Intel E7500 MCH" rev 0x01 at pci0 dev 2 function 1 not configured
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
skc0 at pci4 dev 1 function 0 "3Com 3c940" rev 0x10, Yukon (0x1): irq 3
sk0 at skc0 port A: address 00:0a:5e:65:59:f0
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
xl0 at pci4 dev 2 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 5,
address 00:50:04:73:36:ba
exphy0 at xl0 phy 24: 3Com internal media interface
vga1 at pci4 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci4 dev 4 function 0 "Intel 8255x" rev 0x0d, i82550: irq 11,
address 00:02:b3:d8:ea:bb
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, CD-S520/A, 2.0K> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 3
iic0 at ichiic0
lm1 at iic0 addr 0x2c: W83627HF
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f3dd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
