Hi,
I upgraded a 4.1 machine running bsd.mp to 4.2. This was a remote
upgrade using the instructions in the FAQ for a 4.1 -> 4.2 upgrade. All
kernels used are GENERIC off the CD versions.
On 4.2 the bsd kernel works fine, but when I install the bsd.mp kernel
only one processor was shown and the following error was logged in
/var/log/messages once a second:-
Oct 25 21:03:00 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 21:03:00 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Here are the lines from messages log from that system when booting
bsd.mp. This is a dual XEON:-
Oct 25 20:58:56 host02 syslogd: start
Oct 25 20:58:56 host02 /bsd: OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28
10:53:04 MDT 2007
Oct 25 20:58:56 host02 /bsd: [EMAIL PROTECTED]:/usr/src/
sys/arch/i386/compile/GENERIC.MP
Oct 25 20:58:56 host02 /bsd: cpu0: Intel(R) Xeon(TM) CPU 2.80GHz
("GenuineIntel" 686-class) 2.81 GHz
Oct 25 20:58:56 host02 /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-
ID,CX16,xTPR
Oct 25 20:58:56 host02 /bsd: real mem = 1073037312 (1023MB)
Oct 25 20:58:56 host02 /bsd: avail mem = 1029881856 (982MB)
Oct 25 20:58:56 host02 /bsd: mainbus0 at root
Oct 25 20:58:56 host02 /bsd: bios0 at mainbus0: AT/286+ BIOS, date
03/29/05, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xfa670 (57 entries)
Oct 25 20:58:56 host02 /bsd: bios0: vendor American Megatrends Inc.
version "080010 " date 03/29/2005
Oct 25 20:58:56 host02 /bsd: bios0: Supermicro X6DVL-EG2
Oct 25 20:58:56 host02 /bsd: apm0 at bios0: Power Management spec V1.2
Oct 25 20:58:56 host02 /bsd: apm0: AC on, battery charge unknown
Oct 25 20:58:56 host02 /bsd: apm0: flags 30102 dobusy 0 doidle 1
Oct 25 20:58:56 host02 /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
Oct 25 20:58:56 host02 /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xf51d0/336 (19 entries)
Oct 25 20:58:56 host02 /bsd: pcibios0: PCI Interrupt Router at 000:31:0
("Intel 82801EB/ER LPC" rev 0x00)
Oct 25 20:58:56 host02 /bsd: pcibios0: PCI bus #4 is the last bus
Oct 25 20:58:56 host02 /bsd: bios0: ROM list: 0xc0000/0x8000
0xc8000/0x1000 0xc9000/0x1000
Oct 25 20:58:56 host02 /bsd: ipmi at mainbus0 not configured
Oct 25 20:58:56 host02 /bsd: mainbus0: Intel MP Specification (Version
1.4)
Oct 25 20:58:56 host02 /bsd: cpu0 at mainbus0: apid 0 (boot processor)
Oct 25 20:58:56 host02 /bsd: cpu0: apic clock running at 200 MHz
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 0 is type PCI
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 1 is type PCI
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 2 is type PCI
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 3 is type PCI
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 4 is type PCI
Oct 25 20:58:56 host02 /bsd: mainbus0: bus 5 is type ISA
Oct 25 20:58:56 host02 /bsd: ioapic0 at mainbus0: apid 2 pa 0xfec00000,
version 20, 24 pins
Oct 25 20:58:56 host02 /bsd: ioapic1 at mainbus0: apid 3 pa 0xfec10000,
version 20, 24 pins
Oct 25 20:58:56 host02 /bsd: pci0 at mainbus0 bus 0: configuration mode
1 (no bios)
Oct 25 20:58:56 host02 /bsd: pchb0 at pci0 dev 0 function 0 "Intel E7320
MCH" rev 0x0c
Oct 25 20:58:56 host02 /bsd: ppb0 at pci0 dev 2 function 0 "Intel MCH
PCIE" rev 0x0c
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 2 func 0 pin 2;
line 11
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 2 func 0 pin 3;
line 3
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 2 func 0 pin 4;
line 3
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci1 at ppb0 bus 1
Oct 25 20:58:56 host02 /bsd: ppb1 at pci0 dev 3 function 0 "Intel MCH
PCIE" rev 0x0c
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 3 func 0 pin 2;
line 11
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 3 func 0 pin 3;
line 3
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci_intr_map: bus 0 dev 3 func 0 pin 4;
line 3
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: pci2 at ppb1 bus 2
Oct 25 20:58:56 host02 /bsd: ppb2 at pci0 dev 28 function 0 "Intel
6300ESB PCIX" rev 0x02
Oct 25 20:58:56 host02 /bsd: pci3 at ppb2 bus 3
Oct 25 20:58:56 host02 /bsd: em0 at pci3 dev 3 function 0 "Intel PRO/
1000MT (82541GI)" rev 0x05: apic 3 int 2 (irq 7), address
00:30:48:5c:c1:ca
Oct 25 20:58:56 host02 /bsd: em1 at pci3 dev 4 function 0 "Intel PRO/
1000MT (82541GI)" rev 0x05: apic 3 int 3 (irq 7), address
00:30:48:5c:c1:cb
Oct 25 20:58:56 host02 /bsd: uhci0 at pci0 dev 29 function 0 "Intel
6300ESB USB" rev 0x02: apic 2 int 16 (irq 10)
Oct 25 20:58:56 host02 /bsd: uhci1 at pci0 dev 29 function 1 "Intel
6300ESB USB" rev 0x02: apic 2 int 19 (irq 3)
Oct 25 20:58:56 host02 /bsd: "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29
function 4 not configured
Oct 25 20:58:56 host02 /bsd: "Intel 6300ESB APIC" rev 0x02 at pci0 dev
29 function 5 not configured
Oct 25 20:58:56 host02 /bsd: ehci0 at pci0 dev 29 function 7 "Intel
6300ESB USB" rev 0x02: apic 2 int 23 (irq 5)
Oct 25 20:58:56 host02 /bsd: ehci0: timed out waiting for BIOS
Oct 25 20:58:56 host02 /bsd: usb0 at ehci0: USB revision 2.0
Oct 25 20:58:56 host02 /bsd: uhub0 at usb0: Intel EHCI root hub, rev
2.00/1.00, addr 1
Oct 25 20:58:56 host02 /bsd: ppb3 at pci0 dev 30 function 0 "Intel
82801BA AGP" rev 0x0a
Oct 25 20:58:56 host02 /bsd: pci4 at ppb3 bus 4
Oct 25 20:58:56 host02 /bsd: vga1 at pci4 dev 5 function 0 "ATI Rage XL"
rev 0x27
Oct 25 20:58:56 host02 /bsd: wsdisplay0 at vga1 mux 1: console (80x25,
vt100 emulation)
Oct 25 20:58:56 host02 /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
Oct 25 20:58:56 host02 /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel
6300ESB LPC" rev 0x02: 24-bit timer at 3579545Hz
Oct 25 20:58:56 host02 /bsd: pciide0 at pci0 dev 31 function 2 "Intel
6300ESB SATA" rev 0x02: DMA, channel 0 configured to compatibility,
channel 1 configured to compatibility
Oct 25 20:58:56 host02 /bsd: wd0 at pciide0 channel 1 drive 0:
<ST3250620NS>
Oct 25 20:58:56 host02 /bsd: wd0: 16-sector PIO, LBA48, 238475MB,
488397168 sectors
Oct 25 20:58:56 host02 /bsd: wd0(pciide0:1:0): using PIO mode 4,
Ultra-DMA mode 5
Oct 25 20:58:56 host02 /bsd: ichiic0 at pci0 dev 31 function 3 "Intel
6300ESB SMBus" rev 0x02pci_intr_map: bus 0 dev 31 func 3 pin 2; line 11
Oct 25 20:58:56 host02 /bsd: pci_intr_map: no MP mapping found
Oct 25 20:58:56 host02 /bsd: : irq 11
Oct 25 20:58:56 host02 /bsd: iic0 at ichiic0
Oct 25 20:58:56 host02 /bsd: lm1 at iic0 addr 0x2c: W83627HF
Oct 25 20:58:56 host02 /bsd: lm2 at iic0 addr 0x2f: W83792D rev D
Oct 25 20:58:56 host02 /bsd: usb1 at uhci0: USB revision 1.0
Oct 25 20:58:56 host02 /bsd: uhub1 at usb1: Intel UHCI root hub, rev
1.00/1.00, addr 1
Oct 25 20:58:56 host02 /bsd: usb2 at uhci1: USB revision 1.0
Oct 25 20:58:56 host02 /bsd: uhub2 at usb2: Intel UHCI root hub, rev
1.00/1.00, addr 1
Oct 25 20:58:56 host02 /bsd: isa0 at ichpcib0
Oct 25 20:58:56 host02 /bsd: isadma0 at isa0
Oct 25 20:58:56 host02 /bsd: pckbc0 at isa0 port 0x60/5
Oct 25 20:58:56 host02 /bsd: pckbd0 at pckbc0 (kbd slot)
Oct 25 20:58:56 host02 /bsd: pckbc0: using irq 1 for kbd slot
Oct 25 20:58:56 host02 /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Oct 25 20:58:56 host02 /bsd: pcppi0 at isa0 port 0x61
Oct 25 20:58:57 host02 /bsd: midi0 at pcppi0: <PC speaker>
Oct 25 20:58:57 host02 /bsd: spkr0 at pcppi0
Oct 25 20:58:57 host02 /bsd: lm0 at isa0 port 0x290/8: W83627HF
Oct 25 20:58:57 host02 /bsd: lm1 detached
Oct 25 20:58:57 host02 /bsd: npx0 at isa0 port 0xf0/16: reported by
CPUID; using exception 16
Oct 25 20:58:57 host02 /bsd: pctr: user-level cycle counter enabled
Oct 25 20:58:57 host02 /bsd: mtrr: Pentium Pro MTRR support
Oct 25 20:58:57 host02 /bsd: dkcsum: wd0 matches BIOS drive 0x80
Oct 25 20:58:57 host02 /bsd: root on wd0a swap on wd0b dump on wd0b
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:57 host02 savecore: no core dump
Oct 25 20:58:57 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:57 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:58 host02 spamd[25998]: listening for incoming connections.
Oct 25 20:58:58 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:58 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Oct 25 20:58:59 host02 /bsd: ichiic0: exec: op 1, addr 0x2f, cmdlen 1,
len 1, flags 0x00: timeout, status 0x0
Oct 25 20:58:59 host02 /bsd: ichiic0: abort failed, status
0x42<INTR,INUSE>
Does anyone know how to resolve this problem?
Thanks,
Abdul
