On Tue, Oct 23, 2007 at 02:55:41PM -0700, Rob wrote:
> On 10/23/07, david l goodrich <[EMAIL PROTECTED]> wrote:
> > Nobody? Sad, it's still doing it.
> >
> >
> > On Sun, Oct 21, 2007 at 02:22:43PM -0500, david l goodrich wrote:
> > > I've set up a max-src-conn-rate rule on my gateway router to
> > > mitigate brute-force ssh attacks. This router protects a /28
> > > subnet, 25.108.82.80/28.
> > >
> > > The relevant rules:
> > >
> > > # pfctl -sr | grep attack
> > > block drop in log quick proto tcp from <sshd_attackers> to any
> > > pass in log proto tcp from any to any port = ssh keep state
> > > (source-track rule, max-src-conn-rate 3/30, overload
> > > <sshd_attackers> flush global, src.track 30)
> > > #
> > >
> > > What the three columns of output in the below tcpdump output are:
> > > timestamp, rule action, and target host. As you can tell from
> > > the tcpdump command, the sending host is the same in all cases,
> > > 208.53.147.204
>
> I'm not a pf newbie by any means, but I'm not really qualified to
> answer questions about it either. That said, I don't usually use an
> '=' sign in my pf rules, and the pf faq doesn't list that as one of
> the accepted operators for the port range
> (http://www.openbsd.org/faq/pf/filter.html). If the rule wasn't being
> parsed correctly, it would cause the behavior you're seeing. Try,
I don't have an = sign in my rule, either, i have it in pf.conf as:
pass in log proto tcp from any to any port ssh \
keep state (max-src-conn-rate 3/30, \
overload <sshd_attackers> flush global)
but when i look at my rules with pfctl -sr it shows the =.
>
> block in log quick proto tcp port ssh keep state \
> (source-track rule, max-src-conn-rate 3 / 30 overload
> <sshd_attackers>, src.track 30)
I want to pass ssh traffic by default, so a block rule won't be
terribly helpful.
>
> Note that I wouldn't use a flush global directive for a rule like
> this, because it can lead to a neat DoS where somebody can spoof one
> of your own IP addresses and shut down any ssh sessions you have
> active.
>
> Here's a working sample from my own currently active pf file:
>
> pass in on $ext proto tcp to <server6> port smtp keep state \
> (max-src-conn 15 max-src-conn-rate 10 / 45 overload <smtp-overload>) \
> queue 6smtp
Mine's pretty similar, if a bit more verbose. And I don't use
max-src-conn or queueing.
--david
>
> (FYI, the smtp-overload table moves traffic to a queue that simply
> throttles the connections a little.)
>
> - R.
