Hi list,
My system was freeze and when reboot show:
/dev/rsd0a: file system is clean;not checking
/dev/rsd0d: file system is clean;not checking
/dev/rsd0e: file system is clean;not checking
/dev/rsd0g: INCORRECT BLOCK COUNT I=2699655 (20 should be 16) (CORRECTED)
PARTIALLY TRUNCATED INODE I=19268881
/dev/rsd0g:UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
THE FOLLOWING FILE SYSTEN HAD AN UNEXPECTED INCOSISTENCY:
ffs: /dev/rsd0g(/var)
Automatic File system check failed: help!
Enter pathname of shell or RETURN for sh:
I think this problem is for incompatibility with raid controler SAS5IR, but in
the openbsd page say this hardware is support.
I have two harddisk SATA Raid 1
dmesg
OpenBSD 4.1-stable (GENERIC.MP) #0: Wed Oct 10 10:43:00 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 2146795520 (2096480K)
avail mem = 1952034816 (1906284K)
using 4278 buffers containing 107462656 bytes (104944K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 04/04/07, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x5c00 0xd0000/0x1800
0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16
(irq 5)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 237464MB, 237464 cyl, 16 head, 128 sec, 512 bytes/sec, 486326272 sec
total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 4
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16 (irq
5)
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 16 (irq 5), address 00:19:b9:f7:a7:0a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 17 (irq 3), address 00:19:b9:f7:a7:0b
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20
(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21
(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22
(irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20
(irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 7
vga1 at pci7 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A102> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map:
bus 0 dev 31 func 3 pin 2; line 3
pci_intr_map: no MP mapping found
: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction
translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
bnx0: address 00:10:18:28:41:8a
brgphy2 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
Any suggestions?
Thank,
Christian
