On 26/09/2007, Diana Eichert <[EMAIL PROTECTED]> wrote:
> > On Tue, 25 Sep 2007, Jonathan Gray wrote:
> SNIP
> > There has been at least one dmesg submitted for these,
>
> Did you see any serial ports detected in the dmesg? If so how many?
T'was mine:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class)
366 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,PGE,CMOV,MMX
real mem = 112693248 (107MB)
avail mem = 100970496 (96MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/19/06
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x8000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP BOOT
acpitimer at acpi0 not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "NS CS5535 Host" rev 0x21
vga1 at pci0 dev 1 function 1 "NS CS5535 VIDEO" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"AT&T/Lucent LTMODEM" rev 0x02 at pci0 dev 13 function 0 not configured
pcib0 at pci0 dev 15 function 0 "NS CS5535 ISA" rev 0x13
pciide0 at pci0 dev 15 function 2 "NS CS5535 IDE" rev 0x00: DMA (unsupported),
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (other hardware responding at addresses)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"NS CS5535 AUDIO" rev 0x00 at pci0 dev 15 function 3 not configured
ohci0 at pci0 dev 15 function 4 "NS CS5535 USB" rev 0x06: irq 10, version 1.0,
legacy support
ohci1 at pci0 dev 15 function 5 "NS CS5535 USB" rev 0x06: irq 11, version 1.0,
legacy support
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <ST310014A>
wd0: 16-sector PIO, LBA, 9768MB, 20005650 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at ohci0: USB revision 1.0
uhub0 at usb0: NS OHCI root hub, rev 1.00/1.00, addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1: NS OHCI root hub, rev 1.00/1.00, addr 1
biomask effd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
axe0 at uhub0 port 2 configuration 1 interface 0
axe0: D-Link DUB-E100 rev B1, rev 2.00/0.01, addr 2, AX88772, address
00:80:c8:38:92:7e
rlphy0 at axe0 phy 3: IP101 10/100 PHY, rev. 4
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
--
dir21
