HI all.
I recently acquired a ZyXEL G-302 wireless card. OpenBSD ID's it as rtw.
It shows up on ifconfig. But when I try and config this card, either via
ifconfig or via hostname.rtw0, the whole machine locks hard. It does not
seem to matter what config I use, although I am particularly interested
in hostap mode. It may be a faulty card or something, but it would not
surprise me if I simply made a glaring error somewhere.
I tried to search for answers but Google is not my friend today.
Below are my dmesg and my (attempted) hostname.rtw0. Feel free to
comment/nitpick/flame. Since the machine is not yet networked, these
texts are copied to a windows machine and then mailed, so I hope it
doesn't appear mangled.
Cheers
Marius Van Deventer
=====dmesg======
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.67
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 259551232 (253468K)
avail mem = 229146624 (223776K)
using 3199 buffers containing 13103104 bytes (12796K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 10/14/03, BIOS32 rev. 0 @ 0xfdb40,
SMBIOS rev. 2.3 @ 0xf0630 (31 entries)
bios0: Hewlett-Packard 0884h
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7b10/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xb400 0xcbc00/0x1800 0xe0000/0x1000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03: aperture
at 0xd0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 3
bce0 at pci1 dev 10 function 0 "Broadcom BCM4401" rev 0x01: irq 5,
address 00:02:e3:3d:45:d2
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
rtw0 at pci1 dev 11 function 0 "Realtek 8185" rev 0x20: irq 5
rtw0: ver RTL8185, radio RTL8225, address 00:19:cb:0a:95:0c
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400EB-75CPF0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-152A, CA06> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 5
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: 47m192
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 5,
ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
====hostname.rtw0======
inet 192.168.1.1 255.255.255.0 10.64.15.72 media autoselect mediaopt
hostap nwid my_net -chan
