Hi.
I've been trying to install OpenBSD snapshot (28th Aug) on HP 6510b
laptop, and after "acpi enable" at boot prompt I'm getting some error.
Without enabling acpi installation goes fine, but after that boot hangs
after: "mtrr: Pentium Pro MTRR Support"
quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/23/07, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.4 @ 0xf2ba3 (25 entries)
bios0: vendor Hewlett-Packard version "68DDU Ver. F.08" date 05/23/2007
bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/240 (13 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf58d0/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #40 is the last bus
bios0: ROM list: 0xc0000/0xee00!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
wrong setbufint type
2ca8 Called: \\_SB_.C003.C098.C155
arg0: 0xd17b7910 cnt:01 stk:00 objref: 0xd176d484 index:ffffffff
[\\_SB_.C06A] 0xd176d484 cnt:02 stk:00 field: bitpos=02e0 bitlen=00a0
ref1:d176c904 ref2:0 [Field]
[\\_SB_.C043] 0xd176c904 cnt:32 stk:00 opregion: 00,3f7e7dc0,140
arg1: 0xd17b793c cnt:01 stk:00 objref: 0xd1756410 index:ffffffff
0xd1756410 cnt:00 stk:60 integer: 0
local0: 0xd1756a10 cnt:00 stk:60 integer: 0
2c7d Called: \\_SB_.C003.C098._INI
local0: 0xd1756410 cnt:00 stk:60 integer: 0
panic: aml_die aml_setbufint:983
The operating system has halted.
Please press any key to reboot.
dmesg:
OpenBSD 4.2 (RAMDISK_CD) #468: Tue Aug 28 11:02:17 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz ("GenuineIntel"
686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1064595456 (1015MB)
avail mem = 1023389696 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/23/07, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.4 @ 0xf2ba3 (25 entries)
bios0: vendor Hewlett-Packard version "68DDU Ver. F.08" date 05/23/2007
bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/240 (13 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf58d0/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #40 is the last bus
bios0: ROM list: 0xc0000/0xee00!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82965GM Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
"Intel 82801H HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03
pci1 at ppb0 bus 8
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03
pci2 at ppb1 bus 16
"Intel PRO/Wireless 3945ABG" rev 0x02 at pci2 dev 0 function 0 not
configured
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03
pci3 at ppb2 bus 24
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): irq 11, address 00:17:a4:a3:1f:c2
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03
pci4 at ppb3 bus 40
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 2
cbb0 at pci5 dev 4 function 0 "Ricoh 5C476 CardBus" rev 0xb6: irq 5
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PC05> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: irq 10,
AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI2
0/direct fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
total
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
dkcsum: sd0 matches BIOS drive 0x80
root on rd0a swap on rd0b dump on rd0b
So, is there any way to run OpenBSD on this machine?
Regards
--
RafaE Brodewicz
[EMAIL PROTECTED]
