On Mon, Aug 06, 2007 at 01:51:46PM -0500, Denny White wrote: > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > > When I'm using streamdvd with dvdauthor on a small video dvd or one > that can be safely shrunk, I don't have any problems. But, when I try > to split a large one by selecting certain sequential chapters, I run > into problems. Last night I ripped the 1st 15 chapters of a video dvd > no problem. Audio was fine, etc. I also ripped the entire dvd with > dvdbackup, so I don't think there's anything wrong with the dvd itself. > Later I tried to rip the 2nd half, same as before, with dvdauthor & > streamdvd, chapters 16-29 & that's when the trouble started. I used > script & a high debug level to try to capture as much info as possible. > It's directly below here. Also, some errors from /var/log/messages to > show what was going on underneath.
chapters are not necessarily consecutive, they could bounce around. and AFAIK, many programs have problems with this. some say this is intentional design by the DVD distributor, to make it harder to rip. > Outside of this splitting a dvd problem, the only other problem I > had was with streamanalyze seg faulting now & then, but that probably > had to do with my typing in the wrong parameters. Don't know at this > point. Most of the time, it works okay along with lsdvd. > I read everything I could find before asking this question & googled > around quite a bit. Not a complaint, but some of the documentation > is scant on such things as streamdvd. I also tried contacting the > port maintainer before asking, but I imagine he's busy enough already. > Also tried another method for ripping from: > > http://www.ericdugas.com/howtos/ripDVDWithMplayer/ripDVDWithMplayer.php > > but ran into problems with mp2enc on that one. Thanks for any help I > can get on this. And, if anyone knows of a simpler workable way to > split a large dvd, please let me know. mp2enc is, as the authors say, only included for "completeness". use toolame instead. or use ffmpeg for this whole operation. > Denny white > > NOTE: Where there is a \ at the ends, I added to avoid exceeding > the 72 character limitation on the list. > -------------------------------------------- > Script started on Sun Aug 5 17:39:26 2007 > # dvdauthor -t -o dvd1 -f 'ss treamdvd -i /dev/rcd0c -t 1 -c 16-29 \ > -s 0xe0,0x80,/dev/rcd0c -t 1 -c 16-29 -s 0xe0,0x80, > <0x20 -d 4 |' > DVDAuthor::dvdauthor, version 0.6.11. > Build options: gnugetopt magick iconv freetype fribidi > Send bugs to <[EMAIL PROTECTED]> > > INFO: dvdauthor creating VTS > STAT: Picking VTS 01 > > STAT: Processing streamdvd -i /dev/rcd0c -t 1 -c 16-29 \ > -s 0xe0,0x80,0x20 -d 4 |... > Selected streams: 0xe0 0x80 0x20 > Processing title 1, chapter 16 (1991761) - chapter 29 (3860297) > AV Delay: 185 ms > INFO: [???] mplex version 1.6.1.93 (2.2.3 $Date: 2004/01/13 \ > 20:45:26 $) > Debug 2: Buffer read: 65536 > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: Buffer return: 65536 > Debug 2: Buffer read: 65536 > Debug 2: Buffer return: 65536 > Debug 2: Buffer read: 65536 > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: DVD read > Debug 3: DVD read stopped at next seq hdr > Debug 2: Buffer return: 65536 > INFO: [???] File unnamed-0xe0.m2v looks like an MPEG Video stream. > **ERROR: [???] File unnamed-0x80.ac3 unrecogniseable! > **ERROR: [???] File unnamed-0x20 unrecogniseable! > **ERROR: [???] Unrecogniseable file(s)... exiting. > > ERR: Error reading from pipe: No such file or directory > # ^D > > Script done on Sun Aug 5 17:56:45 2007 > ---------------------------------------------------------- > > NOTE: Where there is a \ at the ends, I added to avoid exceeding > the 72 character limitation on the list same as above. > ---------------------------------------------------------- > Tail from /var/log/messages > I shortened this a lot because of the repetitive error message: > > Aug 5 18:54:03 bubbhasbox /bsd: SENSE KEY: Illegal Request > Aug 5 18:54:03 bubbhasbox /bsd: ASC/ASCQ: Logical Block Address \ > Out of Range > Aug 5 18:54:03 bubbhasbox /bsd: cd0(atapiscsi0:0:0): Check Condition \ > (error 0x70) on opcode 0x28 > Aug 5 18:54:03 bubbhasbox /bsd: SENSE KEY: Illegal Request > Aug 5 18:54:03 bubbhasbox /bsd: ASC/ASCQ: Logical Block Address \ > Out of Range > Aug 5 18:54:03 bubbhasbox /bsd: cd0(atapiscsi0:0:0): Check Condition \ > (error 0x70) on opcode 0x28 > Aug 5 18:54:03 bubbhasbox /bsd: SENSE KEY: Illegal Request > Aug 5 18:54:03 bubbhasbox /bsd: ASC/ASCQ: Logical Block Address \ > Out of Range > Aug 5 18:54:03 bubbhasbox /bsd: cd0(atapiscsi0:0:0): Check Condition \ > (error 0x70) on opcode 0x28 > > -- > > _______ ____ ___ > / __/ _ \/ __/__< / > _\ \/ // / _//___/ / > /___/____/_/ /_/ > > [ 1987 - 2007 ] > > http://sdf.lonestar.org > Public Access Unix System > =============================================================== > GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net > Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A > =============================================================== > iD8DBQFGt2ujy0Ty5RZE55oRAl9GAJ4r/C3R0BTgL7OKP3X8o2b66HEIswCgz/JC > vlAUBvg5vYXTUIusbFUT1mU= > =ci/E > -----END PGP SIGNATURE----- > -- [EMAIL PROTECTED] SDF Public Access UNIX System - http://sdf.lonestar.org