Hi folks,
I've almost over the installation of a toshiba laptop under OpenBSD
4.1. I use a CISCO AIR-CB21AG-E-K9 pcmcia wireless card. The dmesg
tell that is a AR5213 chipset. It seems in the man ath that this
chipset is not supported by the OpenBSD's driver, but it works on this
laptop, so, if this could help the OpenBSD project, I send you my
ifconfig ath0, my netstat -nI ath0 and my dmesg.
If ever you want I make some test for you, I'm ready to help the project.
************************************************************************
First, this is the ifconfig ath0
ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:40:96:a6:c6:0b
groups: wlan egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: nwid ap-amiens chan 1 bssid 00:12:7f:8b:28:00 28%
nwkey 0x01234567890123456789012345
inet6 fe80::240:96ff:fea6:c60b%ath0 prefixlen 64 scopeid 0x5
inet 195.98.236.232 netmask 0xffffff00 broadcast 195.98.236.255
************************************************************************
This the the netstat -nI ath0
Name Mtu Network Address Ipkts Ierrs Opkts
Oerrs Colls
ath0 1500 <Link> 00:40:96:a6:c6:0b 34190 7 22575
31 0
ath0 1500 fe80::%ath0 fe80::240:96ff:fe 34190 7 22575
31 0
ath0 1500 195.98.236/ 195.98.236.232 34190 7 22575
31 0
************************************************************************
This is my dmesg
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz ("GenuineIntel"
686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,
ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 536244224 (523676K)
avail mem = 481591296 (470304K)
using 4278 buffers containing 26935296 bytes (26304K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 01/09/03, BIOS32 rev. 0 @
0xfc04c, SMBIOS rev. 2.3 @ 0xec000 (42 entries)
bios0: TOSHIBA Satellite 2410
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 1:32 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01a0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 420 Go" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
"TI TSB43AB22 FireWire" rev 0x00 at pci2 dev 7 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq
11, address 00:08:0d:fe:b9:5f
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci2 dev 11 function 0 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
cbb1 at pci2 dev 11 function 1 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
"Toshiba SD Controller" rev 0x03 at pci2 dev 13 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4018GAS>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6012, 1334> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02:
irq 11, ICH3 AC97
ac97: codec id 0x594d4803 (Yamaha YMF753-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask effd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
ath0 at cardbus0 dev 0 function 0 "Atheros Communications, Inc.,
AR5001-0000-0000, Wireless LAN Reference Card": irq 11
ath0: AR5213 5.9 phy 4.3 rf5112a 3.6, ETSI1W, address 00:40:96:a6:c6:0b
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21,
addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ar5k_ar5212_nic_wakeup: failed to resume the AR5212 (again)
ath0: unable to reset hardware; hal status 0
PS: Many thanks to the french openbsd users who help me for this
multiboot installation
--
Cordialement
