I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have
various problems.
I've found on previous postings that the axe and uberry driver are
causing a problem and the kernel fails to load.
What I've done until now is to install openbsd 4.1 on another machine
update and recompile the kernel after removing the following options
from it:
#uberry* at uhub? # Research In Motion Blackberry
#axe* at uhub? # ASIX Electronics AX88172 USB
Ethernet
#pckbc0 at isa? # PC keyboard controller
#pckbd* at pckbc? # PC keyboard
#pms* at pckbc? # PS/2 mouse for wsmouse
#pmsi* at pckbc? # PS/2 "Intelli"mouse for
wsmouse
After removing the ps2 keyboard and mouse controller from the kernel
machine boots normally and keyboard and mouse is detected (seems like
there is a USB to PS2 bridge).
PS2 keyboard and mouse would make the machine to take very long time to
boot (trying to initialize keyboard controller)
i386 install shows up the same behaviour.
I've tried the above using a 4.1-current install and now I need to try
the same with 4.1-stable.
Is it possible that we get patches to allow 4.1-stable install CD to be
able to install directly on the DL140-G3 machine?
Here is an 4.1-current (i386) dmesg:
OpenBSD 4.1-current (TELXXXX) #7: Mon Jul 2 20:21:22 EEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/TELXXX
cpu0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
,CX16,xTPR
real mem = 2146050048 (2095752K)
avail mem = 1844817920 (1801580K)
using 4278 buffers containing 214855680 bytes (209820K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd361,
SMBIOS rev. 2.31 @ 0xdc010 (57 entries)
bios0: HP ProLiant DL140 G3
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd360/0xca0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/512 (30 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #16 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1600
0xca800/0x1600 0xdc000/0x4000!
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2
,CX16,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type PCI
mainbus0: bus 17 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x31
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci4 at ppb3 bus 5
ppb4 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
pci5 at ppb4 bus 6
ppb5 at pci0 dev 4 function 0 "Intel 5000X PCIE" rev 0x31
pci6 at ppb5 bus 8
ppb6 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
pci7 at ppb6 bus 9
ppb7 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
pci8 at ppb7 bus 10
ppb8 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
pci9 at ppb8 bus 11
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
ppb9 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci10 at ppb9 bus 14
bge0 at pci10 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 4 int 16 (irq 11), address 00:1a:4b:a4:aa:41
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb10 at pci0 dev 28 function 1 "Intel 6321ESB PCIE" rev 0x09
pci11 at ppb10 bus 15
bge1 at pci11 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 4 int 17 (irq 7), address 00:1a:4b:a4:aa:42
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int
23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int
23 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int
23 (irq 5)
ppb11 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci12 at ppb11 bus 16
vga1 at pci12 dev 2 function 0 "Matrox MGA G200e (ServerEngines)" rev
0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 (irq 255) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: apic 4
int 19 (irq 10)
iic0 at ichiic0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
