On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote:
> Hi again,
> 
> My setup looks like this:
> 
> [em0, em1]-trunk0 <- vlan2 <- carp2....
> [em2, em3]-trunk1 <- vlan104 <- carp104....
> 
> If don't use carp at all everything works fine, but when i add carp to
> trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff
> reboot is needed.
> 

can you show the command sequence you are using?
what openbsd release are you using, can you send a dmesg?
please try to get some more details, try to find a way to reproduce it.

use the list [EMAIL PROTECTED] for bug reports or open a pr with
sendbug(1) (see the manpage for details).

> If only one carp device exists the machine works but as soon as i add two
> it hangs.
> 
> Even if I made some config error the machine should not hang.
> 
> trunk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:0e:0c:db:3f:48
>         trunk: trunkproto failover
>                 trunkport em1 active
>                 trunkport em0 master,active
>         groups: trunk
>         media: Ethernet autoselect
>         status: active
>         inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa
> trunk1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:0e:0c:db:3f:4a
>         trunk: trunkproto failover
>                 trunkport em3 active
>                 trunkport em2 master,active
>         groups: trunk
>         media: Ethernet autoselect
>         status: active
>         inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb
> vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:0e:0c:db:3f:48
>         vlan: 1 priority: 0 parent interface: trunk0
>         groups: vlan
>         inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc
> vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:0e:0c:db:3f:4a
>         vlan: 2 priority: 0 parent interface: trunk1
>         groups: vlan
>         inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe
> carp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:00:5e:00:01:01
>         carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0
>         groups: carp
>         inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16
>         inet 10.10.1.17 netmask 0xfffffff0 broadcast 10.10.1.31
> carp2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:00:5e:00:01:01
>         carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0
>         groups: carp
>         inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17
>         inet 10.10.1.33 netmask 0xfffffff0 broadcast 10.10.1.47
> 
> // Fredrik

Reply via email to