Hello,
i'm encountering a real performance problem since a recent update :
- previous snapshots dated around 22 may was working perfectly, launching my
session (xfce) took around 10-15sec. Launching firefox took around 5secs
- updated last week on 20 of june, launching my session takes around 1
minute and a half, launching ffx takes >20sec
- re-updated today (saw recent x*41.tgz sets update), no improvements
I'm using GENERIC recompiled with acpi devices enabled :
option ACPIVERBOSE
option ACPI_ENABLE
acpi0 at mainbus?
acpitimer* at acpi?
acpihpet* at acpi?
acpiac* at acpi?
acpibat* at acpi?
acpibtn* at acpi?
acpicpu* at acpi?
acpidock* at acpi?
acpiec* at acpi?
acpiprt* at acpi?
acpitz* at acpi?
(i know, everything != GENERIC is not supported, but acpi still needs
testers..)
Who should i blame ? X ? gtk ? Myself ? I didn't see much changes in the
ports i'm using, and system is generally slower in X. maybe acpi regression
?
The only notable change i see in dmesg is the addition of CPU states
(acpicpu0 at acpi0 C3, C3, C2, C1, FVS)
Attached two (lengthy..) dmesg, one from my previous kernel which worked,
and one from -current of today.
Thanks for any hints
Landry
May 25 17:05:20 begbie syslogd: start
May 25 17:05:20 begbie /bsd: OpenBSD 4.1-current (GENERIC) #1: Fri May 25
11:53:04 CEST 2007
May 25 17:05:20 begbie /bsd: [EMAIL PROTECTED]
:/usr/src/sys/arch/i386/compile/GENERIC
May 25 17:05:20 begbie /bsd: cpu0: Intel(R) Pentium(R) M processor
2.00GHz("GenuineIntel" 686-class) 2 GHz
May 25 17:05:20 begbie /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
May 25 17:05:20 begbie /bsd: real mem = 2138472448 (2039MB)
May 25 17:05:20 begbie /bsd: avail mem = 1945001984 (1854MB)
May 25 17:05:20 begbie /bsd: using 4278 buffers containing 107048960 bytes
(104540K) of memory
May 25 17:05:20 begbie /bsd: mainbus0 (root)
May 25 17:05:20 begbie /bsd: bios0 at mainbus0: AT/286+ BIOS, date 09/28/05,
BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf7810 (60 entries)
May 25 17:05:20 begbie /bsd: bios0: Dell Inc. Latitude D410
May 25 17:05:20 begbie /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
May 25 17:05:20 begbie /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfb2d0/176 (9 entries)
May 25 17:05:20 begbie /bsd: pcibios0: PCI Interrupt Router at 000:31:0
("Intel 82371 ISA and IDE" rev 0x00)
May 25 17:05:20 begbie /bsd: pcibios0: PCI bus #3 is the last bus
May 25 17:05:20 begbie /bsd: bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
May 25 17:05:20 begbie /bsd: acpi0 at mainbus0: rev 0
May 25 17:05:20 begbie /bsd: acpi0: tables DSDT FACP APIC ASF! MCFG SSDT
SSDT SSDT
May 25 17:05:20 begbie /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table DSDT not
configured
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table FACP not
configured
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table APIC not
configured
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table ASF! not
configured
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table MCFG not
configured
May 25 17:05:20 begbie /bsd: acpi device at acpi0 from table SSDT not
configured
May 25 17:05:20 begbie last message repeated 2 times
May 25 17:05:20 begbie /bsd: acpiprt0 at acpi0: bus 0 (PCI0)
May 25 17:05:20 begbie /bsd: acpiprt1 at acpi0: bus 2 (PCIE)
May 25 17:05:20 begbie /bsd: acpicpu0 at acpi0: CPU0: 2000, 1600, 1333,
1067, 800 MHz
May 25 17:05:20 begbie /bsd: acpicpu1 at acpi0: CPU1:
May 25 17:05:20 begbie /bsd: acpitz0 at acpi0, critical temperature: 100
degC
May 25 17:05:20 begbie /bsd: acpiac0 at acpi0: AC unit offline
May 25 17:05:20 begbie /bsd: acpibat0 at acpi0: BAT0: model: DELL U58676
serial: 20326 type: LION oem: Sony
May 25 17:05:20 begbie /bsd: acpibat1 at acpi0: BAT1: not present
May 25 17:05:20 begbie /bsd: acpibtn0 at acpi0: LID_
May 25 17:05:20 begbie /bsd: acpibtn1 at acpi0: PBTN
May 25 17:05:21 begbie /bsd: acpibtn2 at acpi0: SBTN
May 25 17:05:21 begbie /bsd: acpidock0 at acpi0: GDCK: not docked (0)
May 25 17:05:21 begbie /bsd: cpu0 at mainbus0
May 25 17:05:21 begbie /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(no bios)
May 25 17:05:21 begbie /bsd: pchb0 at pci0 dev 0 function 0 "Intel
82915GM/PM/GMS Host" rev 0x03
May 25 17:05:21 begbie /bsd: vga1 at pci0 dev 2 function 0 "Intel
82915GM/GMS Video" rev 0x03: aperture at 0xdff00000, size 0x10000000
May 25 17:05:21 begbie /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
May 25 17:05:21 begbie /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
May 25 17:05:21 begbie /bsd: "Intel 82915GM/GMS Video" rev 0x03 at pci0 dev
2 function 1 not configured
May 25 17:05:21 begbie /bsd: ppb0 at pci0 dev 28 function 0 "Intel 82801FB
PCIE" rev 0x03
May 25 17:05:21 begbie /bsd: pci1 at ppb0 bus 1
May 25 17:05:21 begbie /bsd: bge0 at pci1 dev 0 function 0 "Broadcom
BCM5751" rev 0x01, BCM5750 A1 (0x4001): irq 11, address 00:13:72:6d:dd:e1
May 25 17:05:21 begbie /bsd: brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT
PHY, rev. 0
May 25 17:05:21 begbie /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801FB
USB" rev 0x03: irq 11
May 25 17:05:21 begbie /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801FB
USB" rev 0x03: irq 10
May 25 17:05:21 begbie /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801FB
USB" rev 0x03: irq 9
May 25 17:05:21 begbie /bsd: uhci3 at pci0 dev 29 function 3 "Intel 82801FB
USB" rev 0x03: irq 5
May 25 17:05:21 begbie /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801FB
USB" rev 0x03: irq 11
May 25 17:05:21 begbie /bsd: usb0 at ehci0: USB revision 2.0
May 25 17:05:21 begbie /bsd: uhub0 at usb0
May 25 17:05:21 begbie /bsd: uhub0: Intel EHCI root hub, rev 2.00/1.00, addr
1
May 25 17:05:21 begbie /bsd: uhub0: 8 ports with 8 removable, self powered
May 25 17:05:21 begbie /bsd: ppb1 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0xd3
May 25 17:05:21 begbie /bsd: pci2 at ppb1 bus 2
May 25 17:05:21 begbie /bsd: cbb0 at pci2 dev 1 function 0 "TI PCI6515
CardBus" rev 0x00: irq 5
May 25 17:05:21 begbie /bsd: "TI PCI6515 CardBus (Smart Card mode)" rev 0x00
at pci2 dev 1 function 5 not configured
May 25 17:05:21 begbie /bsd: iwi0 at pci2 dev 3 function 0 "Intel
PRO/Wireless 2200BG" rev 0x05: irq 10, address 00:16:6f:78:79:5c
May 25 17:05:21 begbie /bsd: cardslot0 at cbb0 slot 0 flags 0
May 25 17:05:21 begbie /bsd: cardbus0 at cardslot0: bus 3 device 0 cacheline
0x10, lattimer 0x20
May 25 17:05:21 begbie /bsd: pcmcia0 at cardslot0
May 25 17:05:21 begbie /bsd: auich0 at pci0 dev 30 function 2 "Intel 82801FB
AC97" rev 0x03: irq 11, ICH6 AC97
May 25 17:05:21 begbie /bsd: ac97: codec id 0x83847650 (SigmaTel
STAC9750/51)
May 25 17:05:21 begbie /bsd: ac97: codec features headphone, 20 bit DAC, 20
bit ADC, SigmaTel 3D
May 25 17:05:21 begbie /bsd: audio0 at auich0
May 25 17:05:21 begbie /bsd: "Intel 82801FB Modem" rev 0x03 at pci0 dev 30
function 3 not configured
May 25 17:05:21 begbie /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel
82801FBM LPC" rev 0x03: PM disabled
May 25 17:05:21 begbie /bsd: pciide0 at pci0 dev 31 function 1 "Intel
82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1
configured to compatibility
May 25 17:05:21 begbie /bsd: wd0 at pciide0 channel 0 drive 0: <FUJITSU
MHV2080AH>
May 25 17:05:21 begbie /bsd: wd0: 16-sector PIO, LBA, 76319MB, 156301488
sectors
May 25 17:05:21 begbie /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
mode 5
May 25 17:05:21 begbie /bsd: pciide0: channel 1 ignored (disabled)
May 25 17:05:21 begbie /bsd: usb1 at uhci0: USB revision 1.0
May 25 17:05:21 begbie /bsd: uhub1 at usb1
May 25 17:05:21 begbie /bsd: uhub1: Intel UHCI root hub, rev 1.00/1.00, addr
1
May 25 17:05:21 begbie /bsd: usb2 at uhci1: USB revision 1.0
May 25 17:05:21 begbie /bsd: uhub2 at usb2
May 25 17:05:21 begbie /bsd: uhub2: Intel UHCI root hub, rev 1.00/1.00, addr
1
May 25 17:05:21 begbie /bsd: uhub2: 2 ports with 2 removable, self powered
May 25 17:05:21 begbie /bsd: usb3 at uhci2: USB revision 1.0
May 25 17:05:21 begbie /bsd: uhub3 at usb3
May 25 17:05:21 begbie /bsd: uhub3: Intel UHCI root hub, rev 1.00/1.00, addr
1
May 25 17:05:21 begbie /bsd: uhub3: 2 ports with 2 removable, self powered
May 25 17:05:21 begbie /bsd: usb4 at uhci3: USB revision 1.0
May 25 17:05:21 begbie /bsd: uhub4 at usb4
May 25 17:05:21 begbie /bsd: uhub4: Intel UHCI root hub, rev 1.00/1.00, addr
1
May 25 17:05:21 begbie /bsd: uhub4: 2 ports with 2 removable, self powered
May 25 17:05:21 begbie /bsd: isa0 at ichpcib0
May 25 17:05:21 begbie /bsd: isadma0 at isa0
May 25 17:05:21 begbie /bsd: pckbc0 at isa0 port 0x60/5
May 25 17:05:21 begbie /bsd: pckbd0 at pckbc0 (kbd slot)
May 25 17:05:21 begbie /bsd: pckbc0: using irq 1 for kbd slot
May 25 17:05:21 begbie /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
May 25 17:05:21 begbie /bsd: pms0 at pckbc0 (aux slot)
May 25 17:05:21 begbie /bsd: pckbc0: using irq 12 for aux slot
May 25 17:05:21 begbie /bsd: wsmouse0 at pms0 mux 0
May 25 17:05:21 begbie /bsd: pcppi0 at isa0 port 0x61
May 25 17:05:21 begbie /bsd: midi0 at pcppi0: <PC speaker>
May 25 17:05:21 begbie /bsd: spkr0 at pcppi0
May 25 17:05:21 begbie /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID;
using exception 16
May 25 17:05:21 begbie /bsd: biomask effd netmask effd ttymask ffff
May 25 17:05:21 begbie /bsd: pctr: 686-class user-level performance counters
enabled
May 25 17:05:21 begbie /bsd: mtrr: Pentium Pro MTRR support
May 25 17:05:21 begbie /bsd: dkcsum: wd0 matches BIOS drive 0x80
May 25 17:05:21 begbie /bsd: root on wd0a swap on wd0b dump on wd0b
May 25 17:05:21 begbie savecore: no core dump
May 25 17:05:23 begbie /bsd: auich0: measured ac97 link rate at 48004 Hz,
will use 48000 Hz
May 25 17:09:53 begbie /bsd: ugen0 at uhub2 port 1
May 25 17:09:53 begbie /bsd: ugen0: Dell Bluetooth 350, rev 2.00/16.57, addr
2
May 25 17:09:59 begbie /bsd: ugen0: at uhub2 port 1 (addr 2) disconnected
May 25 17:09:59 begbie /bsd: ugen0 detached
latest :
OpenBSD 4.1-current (GENERIC) #4: Wed Jun 27 15:42:37 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 2138472448 (2039MB)
avail mem = 2060226560 (1964MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/28/05, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf7810 (60 entries)
bios0: Dell Inc. Latitude D410
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb2d0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC ASF! MCFG SSDT SSDT SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table ASF! not configured
acpi device at acpi0 from table MCFG not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0 C3, C3, C2, C1, FVS
acpicpu0: 2000, 1600, 1333, 1067, 800 MHz
acpicpu1 at acpi0 C3, C2
acpitz0 at acpi0, critical temperature: 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0: model: DELL U58676 serial: 20326 type: LION oem:
Sony
acpibat1 at acpi0: BAT1: not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK: docked (15)
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x03: aperture
at 0xdff00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): irq 11, address 00:13:72:6d:dd:e1
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
cbb0 at pci2 dev 1 function 0 "TI PCI6515 CardBus" rev 0x00: irq 5
"TI PCI6515 CardBus (Smart Card mode)" rev 0x00 at pci2 dev 1 function 5 not
configured
iwi0 at pci2 dev 3 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 10,
address 00:16:6f:78:79:5c
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6
AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 2: Dell product 0x0058, rev 2.00/0.00, addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Primax Electronics USB Optical Mouse, rev 2.00/2.00, addr 3, iclass
3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhub6 at uhub5 port 3: Dell Dell USB Keyboard Hub, rev 1.10/1.00, addr 4
uhidev1 at uhub6 port 1 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard Hub, rev 1.10/1.00, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub6 port 1 configuration 1 interface 1
uhidev2: Dell Dell USB Keyboard Hub, rev 1.10/1.00, addr 5, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
