here is a dmesg from 4.1 RELEASE, and the Raid set is fine, everything
works.
penBSD 4.1 (GENERIC.MP) #1225: Sat Mar 10 19:23:18 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 1064857600 (1039900K)
avail mem = 964161536 (941564K)
using 4278 buffers containing 53366784 bytes (52116K) of memory
User Kernel Config
UKC> disable apm
298 apm0 disabled
UKC> enable acpi
388 acpi0 enabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/29/06, BIOS32 rev. 0 @
0xfa020, SMBIOS rev. 2.4 @ 0xf0000 (39 entries)
bios0: Biostar 945GZ Micro 775 SE
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xc964
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc810/304 (17 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 19 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xaa00! 0xcc000/0x1000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP _HPT MCFG APIC
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus 0 (PEX1)
acpiprt3 at acpi0: bus 0 (PEX2)
acpiprt4 at acpi0: bus 0 (PEX3)
acpiprt5 at acpi0: bus 0 (PEX4)
acpiprt6 at acpi0: bus 0 (PEX5)
acpiprt7 at acpi0: bus 4 (HUB0)
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpitz at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture
at 0xfde80000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 4 int 16 (irq 12)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x10ec (rev. 0.1), HDA version 1.0
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
pci2 at ppb1 bus 2
arc0 at pci2 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 4 int 18 (irq 11)
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.42 2007-1-15
scsibus0 at arc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3
0/direct fixed
sd0: 610351MB, 59185 cyl, 44 head, 480 sec, 512 bytes/sec, 1249999872 sec total
ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4
int 23 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4
int 19 (irq 15)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4
int 18 (irq 3)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4
int 16 (irq 12)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4
int 23 (irq 5)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci4 at ppb3 bus 4
rl0 at pci4 dev 5 function 0 "Realtek 8139" rev 0x10: apic 4 int 20
(irq 10), address 00:e0:4d:14:d6:22
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, CD-ROM CDU5225, NYS4> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600JS-00NCB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic
4 int 19 (irq 15)
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pctr: user-level cycle counter enabled
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: sd0 matches BIOS drive 0x81
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
On 6/10/07, Sam Fourman Jr. <[EMAIL PROTECTED]> wrote:
>
>
>
> On 6/10/07, Stuart Henderson <[EMAIL PROTECTED]> wrote:
> >
> > > > bios0 at mainbus0: AT/286+ BIOS, date 12/29/06, BIOS32 rev. 0 @
> >
> > looks like there's a slightly newer bios:
> > http://www.biostar-usa.com/mbdownloads.asp?model=945GZ%20MICRO%20775%20SE
> >
> >
> > don't know, might be worth a try... as is the usual way with pc vendors,
> > they don't bother to include a changelog, though even if they did they
> > would probably not bother to list half of the changes :(
> >
> > there are some (multiport?) NICs missing from that dmesg that were
> > present before, did you unplug them or are they not being detected?
> > (if you didn't unplug them, I wonder if it's worth trying that...)
>
>
>
> I will update the new bios as well as get a newer -current snapshot,
> I did remove the multi port nics, as I thought they may be causing
> trouble.
>
> Thank you for your help.
>
> I really appreciate it.
>
> Sam Fourman Jr.
