* mgb wrote: > List, > > I am attempting to get pxeboot working on a WRAP board with openbsd 4.1 > generic however the loading of either kernel, bsd or bsd.rd, is stalling. > > I've search around the archives and have taken the steps mentioned here: > > http://marc.info/?l=openbsd-misc&m=117978591113386&w=2 > > I have updated the BIOS on the wrap board with a PXE.BIN downloaded from > rom-o-matic.net which uses etherboot 5.4.3 and the NIC type natsemi:dp83815. > > below is the output from the wrap board: > > PC Engines WRAP.2B/2C v1.11 > 640 KB Base Memory > 130048 KB Extended Memory > > 01F0 - no drive found ! > ROM segment 0xe000 length 0x8000 reloc 0x00000000 > Etherboot 5.4.3 (GPL) http://etherboot.org > Drivers: NATSEMI Images: NBI ELF Multiboot a.out PXE Exports: PXE > Protocols: DHCP TFTP > Relocating _text from: [0008bb80,0009fd90) to [07eebdf0,07f00000) > Boot from (N)etwork (D)isk or (Q)uit? N > > Probing pci nic... > [dp83815] > natsemi_probe: MAC addr 00:0D:B9:04:47:F8 at ioaddr 0X1000 > natsemi_probe: Vendor:0X100B Device:0X0020 > dp83815: Transceiver default autoneg. enabled, advertise 100 full duplex. > dp83815: Transceiver status 7869 advertising 05E1 > dp83815: Setting full-duplex based on negotiated link capability. > Searching for server (DHCP)..... > Me: 192.168.1.200, DHCP: 192.168.1.1, TFTP: 192.168.1.1, Gateway 192.168.1.1 > Loading 192.168.1.1:pxeboot ...(PXE)....................................done > probing: pc0 com0 pci pxe![2.1] mem[640K 125M a20=on] > disk: > net: mac 00:0d:b9:04:47:f8, ip 192.168.1.200, server 192.168.1.1 > >> OpenBSD/i386 PXEBOOT 1.11 > boot> bsd1.rd > booting tftp:bsd.rd: 4679892+742564 [52+169536+154918]=0x57b288 > dp83815: Setting full-duplex based on negotiated link capability. > entry point at 0x200120 > > the loading stalls at this point, tcpdump shows the following:
maybe it just looks like it is stalled... try setting the console to com0: boot> stty com0 9600 boot> set tty com0 boot> bsd.rd > > 11:48:27.321421 IP 192.168.1.1.32831 > 192.168.1.200.2905: UDP, length 222 > [EMAIL > PROTECTED]@.U..........?.Y......&0.nchrdev.ex_ca.ieee80211_merge_print_intvl.mfi_get_info.ep_eisa_ca.ath_power.aue_cd.cac_shutdown.piix_pci_icu.re_pci_devices.af2rtafidx.pciide_ca.fddprint.natsemi_pci_intr.rtw_ioctl.pciide_chansetup.qsphy_ca.shmmaxpgs. > 11:48:28.319634 IP 192.168.1.1.32831 > 192.168.1.200.2905: UDP, length 222 > [EMAIL > PROTECTED]@.U..........?.Y......&0.nchrdev.ex_ca.ieee80211_merge_print_intvl.mfi_get_info.ep_eisa_ca.ath_power.aue_cd.cac_shutdown.piix_pci_icu.re_pci_devices.af2rtafidx.pciide_ca.fddprint.natsemi_pci_intr.rtw_ioctl.pciide_chansetup.qsphy_ca.shmmaxpgs. > 11:48:30.319653 IP 192.168.1.1.32831 > 192.168.1.200.2905: UDP, length 222 > [EMAIL > PROTECTED]@.U..........?.Y......&0.nchrdev.ex_ca.ieee80211_merge_print_intvl.mfi_get_info.ep_eisa_ca.ath_power.aue_cd.cac_shutdown.piix_pci_icu.re_pci_devices.af2rtafidx.pciide_ca.fddprint.natsemi_pci_intr.rtw_ioctl.pciide_chansetup.qsphy_ca.shmmaxpgs. > 11:48:34.319901 IP 192.168.1.1.32831 > 192.168.1.200.2905: UDP, length 222 > [EMAIL > PROTECTED]@.U..........?.Y......&0.nchrdev.ex_ca.ieee80211_merge_print_intvl.mfi_get_info.ep_eisa_ca.ath_power.aue_cd.cac_shutdown.piix_pci_icu.re_pci_devices.af2rtafidx.pciide_ca.fddprint.natsemi_pci_intr.rtw_ioctl.pciide_chansetup.qsphy_ca.shmmaxpgs. > 11:48:42.320416 IP 192.168.1.1.32831 > 192.168.1.200.2905: UDP, length 222 > [EMAIL > PROTECTED]@.U..........?.Y......&0.nchrdev.ex_ca.ieee80211_merge_print_intvl.mfi_get_info.ep_eisa_ca.ath_power.aue_cd.cac_shutdown.piix_pci_icu.re_pci_devices.af2rtafidx.pciide_ca.fddprint.natsemi_pci_intr.rtw_ioctl.pciide_chansetup.qsphy_ca.shmmaxpgs. > 11:48:47.320663 arp who-has 192.168.1.200 tell 192.168.1.1 > ..........Ze................ > 11:48:48.320728 arp who-has 192.168.1.200 tell 192.168.1.1 > ..........Ze................ > 11:48:49.320787 arp who-has 192.168.1.200 tell 192.168.1.1 > ..........Ze................ > 11:48:58.325352 arp who-has 192.168.1.200 tell 192.168.1.1 > ..........Ze................ > 11:48:59.325417 arp who-has 192.168.1.200 tell 192.168.1.1 > ..........Ze................ > 11:49:00.325480 arp who-has 192.168.1.200 tell 192.168.1.1 > > I have used a boot.conf which contains this: > > set tty pc0 > > I have tried com0 and the output freezes whilst I type bsd.rd > > Many thanks for your time
