Hi, modulate state isn't working on OpenBSD 4.1-stable amd64 with the bnx NIC (Dell PowerEdge 2950). Using modulate state for connections on the enc0 interface works just fine.
You can try it yourself at 87.230.56.80. SSH is reachable on port 22 with keep state (works) and port 8022 with modulate state (not working). In this archive you'll find tcpdumps in pcap format from a working SSH connection using keep state and a not working connection with modulate state. http://lechtermann.net/pub/OpenBSD/dumps.tgz 10.20.13.8 is the local IP which gets natted to 87.230.108.20. If you need any other informations please just say so. Since this doesn't work on either NIC in the system I asume that it is not a hardware but a driver problem. Thanks in advance, Michael PS: This is the GENERIC stable kernel with activated ACPI. The issue also exists on the release GENERIC(.MP) kernels. OpenBSD 4.1-stable (GENERIC.MP-ACPI) #0: Thu May 31 12:17:04 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP-ACPI real mem = 3488907264 (3407136K) avail mem = 2990456832 (2920368K) using 22937 buffers containing 349097984 bytes (340916K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries) bios0: Dell Inc. PowerEdge 2950 acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.26 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT ,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 332MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995.02 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT ,DS-CPL,VMX,TM2,CX16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0 apid 3 pa 0xfec81000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 3 acpi device at acpi0 from table SPCR not configured acpihpet0 at acpi0 table HPET: 14318179 Hz acpi device at acpi0 from table MCFG not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus -1 (PE2X) acpiprt6 at acpi0: bus 1 (PEX3) acpiprt7 at acpi0: bus 2 (PE2P) acpiprt8 at acpi0: bus 12 (PEX4) acpiprt9 at acpi0: bus -1 (PE2P) acpiprt10 at acpi0: bus -1 (PEX5) acpiprt11 at acpi0: bus 0 (PE2P) acpiprt11: no apic found for irq 128 acpiprt11: no apic found for irq 129 acpiprt11: no apic found for irq 142 acpiprt12 at acpi0: bus 14 (PEX6) acpiprt13 at acpi0: bus -1 (PXHA) acpiprt14 at acpi0: bus -1 (PXHB) acpiprt15 at acpi0: bus 4 (SBEX) acpiprt16 at acpi0: bus 16 (COMP) ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16 (irq 11) ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 3 int 14 (irq 5) mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed sd0: 139392MB, 139392 cyl, 64 head, 32 sec, 512 bytes/sec, 285474816 sec total ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12 pci10 at ppb9 bus 12 ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 pci11 at ppb10 bus 13 ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 pci12 at ppb11 bus 14 ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 pci13 at ppb12 bus 15 pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 pci14 at ppb13 bus 4 ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 pci15 at ppb14 bus 5 bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16 (irq 11) uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 2 int 21 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 2 int 20 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 2 int 21 (irq 11) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 2 int 21 (irq 11) usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 pci16 at ppb15 bus 16 vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09 pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0 configured to compatibility, channel 1 configured to com patibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec uhub4 at uhub3 port 1 uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2 uhub4: 2 ports with 2 removable, self powered, multiple transaction translators uhidev0 at uhub4 port 1 configuration 1 interface 0 uhidev0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 uhidev1: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1 ums0 at uhidev1 ums0: X report 0x0002 not supported umass0 at uhub4 port 2 configuration 1 interface 0 umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets cd1 at scsibus2 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom removable umass1 at uhub4 port 2 configuration 1 interface 1 umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4 umass1: using SCSI over Bulk-Only scsibus3 at umass1: 2 targets sd1 at scsibus3 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0 0/direct removable sd1: drive offline uhub5 at uhub3 port 5 uhub5: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 5 uhub5: 4 ports with 4 removable, self powered, multiple transaction translators dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 bnx1: address 00:1a:a0:19:78:fd brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 bnx0: address 00:1a:a0:19:78:ff brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
