Hi,
On Mon, 30.04.2007 at 21:04:37 -0400, Rob Waite <[EMAIL PROTECTED]> wrote:
> booting cd0a:4.1/i386/bsd.rd: blah blah
> entry point at blah blah
>
> avm_page_physload: unable to load physical memory segment. 5 segments
> allocated, ignoring blah blah
> increase VM_PHYSSEG_MAX
I experience the same problem. The machine in question runs fine with
OpenBSD 4.0, but does not even boot from CD, or with any of the 4.1
kernels I tried. The cued session below shows the dmesg for 4.0, and
what goes wrong with 4.1.
Script started on Mon May 21 11:21:09 2007
$ ttu
cu -l ttyS0
Connected.
>> OpenBSD/i386 BOOT 2.10
booting hd0a:/bsd: \
5515872|
+867984 [52+274160/
+255770-
]=0x6980a4
entry point at 0x200120
[ using 530356 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 4<invalid_time>
cpu0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
cpu0: unknown Core FSB_FREQ value 0 (0xc1c8149e)
cpu0: EST: unknown system bus clock
real mem = 2141421568 (2091232K)
avail mem = 1945268224 (1899676K)
using 4256 buffers containing 107175936 bytes (104664K) of memory
RTC BIOS diagnostic error 4<invalid_time>
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/18/06, SMBIOS rev. 2.5 @
0x7fa42000 (56 entries)
bios0: MAXDATA PLATINUM 2200 IR M6
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x5200 0xce800/0x1000 0xcf800/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x25d8 rev 0xb1
ppb0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x25f7 rev 0xb1
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci2 dev 2 function 0 vendor "Intel", unknown product 0x3518 rev 0x01
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 PT (80003ES2)" rev 0x01: irq 5,
address 00:04:23:d6:10:e2
em1 at pci5 dev 0 function 1 "Intel PRO/1000 PT (80003ES2)" rev 0x01: irq 11,
address 00:04:23:d6:10:e3
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 6
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 7
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 8
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 9
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 10
ppb10 at pci10 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci11 at ppb10 bus 11
mfi0 at pci11 dev 14 function 0 "Symbios Logic MegaRAID SAS 1064R" rev 0x00:
irq 5
mfi0: logical drives 1, version 5.0.1-0041, 128MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <LSI, MegaRAID 8308ELP, 1.02> SCSI3 0/direct fixed
sd0: 139236MB, 139236 cyl, 64 head, 32 sec, 512 bytes/sec, 285155328 sec total
ppb11 at pci10 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci12 at ppb11 bus 12
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 13
vendor "Intel", unknown product 0x1a38 (class system subclass miscellaneous,
rev 0xb1) at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 12 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-R, 1.8A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: irq 10
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0f: file system is clean; not checking
/dev/rsd0h: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0l: file system is clean; not checking
/dev/rsd0m: file system is clean; not checking
/dev/rsd0o: file system is clean; not checking
setting tty flags
machdep.kbdreset: 0 -> 1
kern.maxfiles: 1772 -> 10000
starting network
starting system logger
starting initial daemons: ntpd.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sshd.
starting local daemons:.
standard daemons: cron.
Mon May 21 11:27:56 CEST 2007
OpenBSD/i386 (foo.example.com) (tty00)
login:
OpenBSD/i386 (foo.example.com) (tty00)
login: t
root
Password:
Last login: Mon May 21 11:30:17 on ttyC0
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
Terminal type? [vt220]
# dmesg
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 4<invalid_time>
cpu0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
cpu0: unknown Core FSB_FREQ value 0 (0xc1c8149e)
cpu0: EST: unknown system bus clock
real mem = 2141421568 (2091232K)
avail mem = 1945268224 (1899676K)
using 4256 buffers containing 107175936 bytes (104664K) of memory
RTC BIOS diagnostic error 4<invalid_time>
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/18/06, SMBIOS rev. 2.5 @
0x7fa42000 (56 entries)
bios0: MAXDATA PLATINUM 2200 IR M6
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x5200 0xce800/0x1000 0xcf800/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x25d8 rev 0xb1
ppb0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x25f7 rev 0xb1
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci2 dev 2 function 0 vendor "Intel", unknown product 0x3518 rev 0x01
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 PT (80003ES2)" rev 0x01: irq 5,
address 00:04:23:d6:10:e2
em1 at pci5 dev 0 function 1 "Intel PRO/1000 PT (80003ES2)" rev 0x01: irq 11,
address 00:04:23:d6:10:e3
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 6
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 7
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 8
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 9
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 10
ppb10 at pci10 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci11 at ppb10 bus 11
mfi0 at pci11 dev 14 function 0 "Symbios Logic MegaRAID SAS 1064R" rev 0x00:
irq 5
mfi0: logical drives 1, version 5.0.1-0041, 128MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <LSI, MegaRAID 8308ELP, 1.02> SCSI3 0/direct fixed
sd0: 139236MB, 139236 cyl, 64 head, 32 sec, 512 bytes/sec, 285155328 sec total
ppb11 at pci10 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci12 at ppb11 bus 12
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 13
vendor "Intel", unknown product 0x1a38 (class system subclass miscellaneous,
rev 0xb1) at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 12 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-R, 1.8A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: irq 10
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
# sync
# sync
# shutdown -r now
Shutdown NOW!
shutdown: [pid 27715]
*** FINAL System shutdown message from [EMAIL PROTECTED] ***
System going down IMMEDIATELY
System shutdown time has arrived
/etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
uhci1: host controller halted
uhci3: host controller halted
rebooting...
>> OpenBSD/i386 BOOT 2.10
boot>
booting hd0a:/bsd.mp: \
5611032|
+882424 [52+286400\
+266500|
]=0x6b867c
entry point at 0x200120
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fa9a -> 0x7fad4
increase VM_PHYSSEG_MAX
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fb1a -> 0x7fb2b
increase VM_PHYSSEG_MAX
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fb3a -> 0x7fbfc
increase VM_PHYSSEG_MAX
[ using 553324 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.1 (GENERIC.MP) #1225: Sat Mar 10 19:23:18 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 4<invalid_time>
cpu0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2141421568 (2091232K)
avail mem = 1945960448 (1900352K)
using 4278 buffers containing 107266048 bytes (104752K) of memory
RTC BIOS diagnostic error 4<invalid_time>
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/18/06, SMBIOS rev. 2.5 @ 0x7fa42000
(56 entries)
bios0: MAXDATA PLATINUM 2200 IR M6
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x5200 0xce800/0x1000 0xcf800/0x1000
acpi at mainbus0 not configured
uvm_fault(0xd077fda0, 0x7f000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at extent_alloc_region+0x31: movl 0x8(%edi),%eax
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb{0}> trace
extent_alloc_region(7fb3a,ca2,2,10) at extent_alloc_region+0x31
bus_space_map(0,ca2,2,0,d08bbcc4,16e065,b0,a) at bus_space_map+0x46
ipmi_map_regs(d08bbc80,d08bbe80,d08bbc68,d0310c1a) at ipmi_map_regs+0x5a
ipmi_match(d2a3bfc0,d073d5e0,d08bbe80,d2a3bfc0,d0203579) at ipmi_match+0x6c
config_init(d08bbde0,d073d5e0,d08bbe08,d08bbe80) at config_init+0xb6
config_search(0,d2a3bfc0,d08bbe80,3) at config_search+0x10d
config_found_sm(d2a3bfc0,d08bbe80,d048faf4,0) at config_found_sm+0x1c
mainbus_attach(0,d2a3bfc0,0,0,d08ba330) at mainbus_attach+0x294
config_attach(0,d073a4cc,0,0,d077fe80) at config_attach+0xef
config_rootfound(d06a1b18,0,d08bbf38,d0463166) at config_rootfound+0x27
cpu_configure(0,1,3,0,6) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x368
ddb{0}> machine sysregs
idtr: 0xd079e6e0/07ff
gdtr: 0xeb675000/ffff
ldtr: 0x0018
tr: 0x0060
cr0: 0x8001003f
cr2: 0x0007fb42
cr3: 0x008b9000
cr4: 0x000006c0
ddb{0}> machine cpuinfo
* 0: ddb
ddb{0}> machine acpi tree
ddb{0}> continue
uvm_fault(0xd077fda0, 0x7f000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at extent_alloc_region+0x31: movl 0x8(%edi),%eax
ddb{0}> boot crash
rebooting...
>> OpenBSD/i386 BOOT 2.10
boot> boot /bsd
booting hd0a:/bsd: \
5567348|
+871228 [52+283664|
+263996-
]=0x6a9ba4
entry point at 0x200120
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fa9a -> 0x7fad4
increase VM_PHYSSEG_MAX
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fb1a -> 0x7fb2b
increase VM_PHYSSEG_MAX
uvm_page_physload: unable to load physical memory segment
5 segments allocated, ignoring 0x7fb3a -> 0x7fbfc
increase VM_PHYSSEG_MAX
[ using 548084 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 4<invalid_time>
cpu0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2141421568 (2091232K)
avail mem = 1946021888 (1900412K)
using 4278 buffers containing 107266048 bytes (104752K) of memory
RTC BIOS diagnostic error 4<invalid_time>
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/18/06, SMBIOS rev. 2.5 @ 0x7fa42000
(56 entries)
bios0: MAXDATA PLATINUM 2200 IR M6
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x5200 0xce800/0x1000 0xcf800/0x1000
acpi at mainbus0 not configured
uvm_fault(0xd07751e0, 0x7f000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at extent_alloc_region+0x31: movl 0x8(%edi),%eax
ddb> trace
extent_alloc_region(7fb3a,ca2,2,10) at extent_alloc_region+0x31
bus_space_map(0,ca2,2,0,d08accc4,16e062,b0,a) at bus_space_map+0x46
ipmi_map_regs(d08acc80,d08ace80,d08acc68,d030f9d2) at ipmi_map_regs+0x5a
ipmi_match(d2930fc0,d0732e34,d08ace80,d2930fc0,d02024ed) at ipmi_match+0x6c
config_init(d08acde0,d0732e34,d08ace08,d08ace80) at config_init+0xb6
config_search(0,d2930fc0,d08ace80,3) at config_search+0x10d
config_found_sm(d2930fc0,d08ace80,d048b700,0) at config_found_sm+0x1c
mainbus_attach(0,d2930fc0,0,0,d08ab330) at mainbus_attach+0x268
config_attach(0,d072fd8c,0,0,d07752c0) at config_attach+0xef
config_rootfound(d0699a18,0,d08acf38,d045ffa6) at config_rootfound+0x27
cpu_configure(0,1,3,0,6) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x348
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb> boot poweroff
Attempting to power down...
The operating system has halted.
Please press any key to reboot.
rebooting...
Disconnected.
Script done on Mon May 21 11:44:39 2007
Is this problem worth opening a bug on the OpenBSD web site?
TIA!
Best,
--Toni++
