Here is the trace.

You could download my whole vmware image to reproduce...

Reyk Floeter wrote:
> On Thu, May 03, 2007 at 08:01:53PM +0200, Bert Koelewijn wrote:
>> Is anybody successfully using the vmxnet network driver (vic)?
> 
> yes, i was using it with esx and the freeware vmware server.
> 
> time to test it again...
> 
>> With various VMWare Server 1.0+ versions and host operating 
>> systems I'm experiencing the following problem:
>>
>>      vm_fault(0xd5fd9298, 0x0, 0, 3) -> e
>>      kernel: page fault trap, code=0
>>      Stopped at      _bus_dmamap_load_mbuf+0xf:       movl    $0,0x18(%esi)
>>
> 
> yuck
> 
> do you get the ddb prompt to enter a 'trace' command?
> 
>> -Bert
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
>>      groups: lo
>>      inet 127.0.0.1 netmask 0xff000000
>>      inet6 ::1 prefixlen 128
>>      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
>> vic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>      lladdr 00:0c:29:07:b9:ae
>>      groups: egress
>>      media: Ethernet autoselect
>>      status: active
>>      inet 192.168.2.30 netmask 0xffffff00 broadcast 192.168.2.255
>>      inet6 fe80::20c:29ff:fe07:b9ae%vic0 prefixlen 64 scopeid 0x1
>> pflog0: flags=0<> mtu 33224
>> enc0: flags=0<> mtu 1536
>> OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
>>     [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 
>> GHz
>> cpu0: 
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3
>> real mem  = 267939840 (261660K)
>> avail mem = 236793856 (231244K)
>> using 3302 buffers containing 13524992 bytes (13208K) of memory
>> mainbus0 (root)
>> bios0 at mainbus0: AT/286+ BIOS, date 04/17/06, BIOS32 rev. 0 @ 0xfd880, 
>> SMBIOS rev. 2.31 @ 0xe0010 (45 entries)
>> bios0: VMware, Inc. VMware Virtual Platform
>> apm0 at bios0: Power Management spec V1.2
>> apm0: AC on, battery charge unknown
>> apm0: flags 30102 dobusy 0 doidle 1
>> pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
>> pcibios0: PCI bus #1 is the last bus
>> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000! 
>> 0xe0000/0x4000!
>> acpi at mainbus0 not configured
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
>> pci1 at ppb0 bus 1
>> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 
>> 0 configured to compatibility, channel 1 configured to compatibility
>> wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
>> wd0: 64-sector PIO, LBA, 8192MB, 16777216 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> SCSI0 
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus 
>> disabled
>> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> mpi0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: irq 9
>> scsibus1 at mpi0: 16 targets
>> vic0 at pci0 dev 17 function 0 "VMware Virtual NIC" rev 0x10: irq 11
>> vic0: VMXnet 864F, address 00:0c:29:07:b9:ae
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pmsi0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pmsi0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> biomask ef65 netmask ef65 ttymask ffe7
>> pctr: 686-class user-level performance counters enabled
>> mtrr: CPU supports MTRRs but not enabled
>> dkcsum: wd0 matches BIOS drive 0x80
>> root on wd0a
>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>> arp info overwritten for 192.168.2.254 by 00:50:56:fe:78:6c on vic0

[demime 1.01d removed an attachment of type image/png which had a name of 
vm_fault.PNG]

Reply via email to