Hello,
I played around with two boxes and installed OpenBSD 4.1 from CD,
configured OSPF und BGP between this two boxes (I connected them via a
crossover cable) and finally tested everything doing a reboot:
both boxes are booting fine 'till the login-prompt. But one of the two
boxes always freezes. No keyboard input, no network acitivity. I can
reproduce this behavior. When I disconenct the direct link, everything
is fine.
I disabled ospf and bgp on both boxes, plugged in the direct link and
tried again. Oh, what a surprise! Both boxes boots fine, and there is no
freezing! Now I can start ospfd and bgpd manually, no problems.
Sometimes I can read a message concerning "emX - watchdog time out -
resetting".
Does anybody have a idea, what's going on here?
Regards,
Falk
--snip--
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1133MHz ("GenuineIntel"
686-class) 1.13 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073184768 (1048032K)
avail mem = 971841536 (949064K)
using 4278 buffers containing 53784576 bytes (52524K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xfb1e0 (47 entries)
bios0: Dell Computer Corporation PowerEdge 1650
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc200/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000
0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.0 interface BT iobase 0xe4/3 spacing 1 irq 10
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq
7, address 00:0f:1f:66:3f:d2
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq
5, address 00:0f:1f:66:3f:d3
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 3
scsibus0 at ahc0: 16 targets
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST336605LC !#, B243> SCSI3
0/direct fixed
sd0: 34715MB, 29550 cyl, 4 head, 601 sec, 512 bytes/sec, 71096640 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.29> SCSI2
3/processor fixed
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 7
scsibus1 at ahc1: 16 targets
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
em2 at pci2 dev 8 function 0 "Intel PRO/1000 (82542)" rev 0x03: irq 5,
address 00:02:a5:ce:47:95
em3 at pci2 dev 10 function 0 "Intel PRO/1000 (82542)" rev 0x03: irq 3,
address 00:02:a5:ce:47:e8
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
iic0 at piixpm0: disabled to avoid ipmi0 interactions
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffcd netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
