Chris Cappuccio wrote:
> You have both IDE disks on the same IDE channel which is
> problematic. Set both IDE disks to 'master' and put them on
> separate IDE channels.
Cheers, what a difference!
Not a bug, eey?
OpenBSD 4.1-current (GENERIC) #5: Sun Apr 22 01:44:59 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (785948K)
avail mem = 725520384 (708516K)
using 4278 buffers containing 40366080 bytes (39420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: MSI MS-6380E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12
ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq
12, address 00:08:a1:3c:34:7a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:4c:67:52:80
rlphy0 at rl0 phy 0: RTL internal PHY
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00
0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 6L250R0>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
# Han
