Hi,
I installed waveplay from ports on OpenBSD 4.1 current.
Trying to play a wavefile I get the Following Error.
Could Some one please tell me how to troubleshoot this?
$ waveplay sos.wav
File name : sos.wav
Sampling rate : 8000 Hz
Bits/Sample : 8 Bits
Channels : 1
Size : 2147479552 Bytes
Can't set channels.
$
this line is in the /var/log/messages
==========================================
Apr 21 03:19:46 current /bsd: didn't find Record format 6/16/1
===========================================
dmesg below.
Thankyou so much
Kind Regards
Siju
==================================================
$ mixerctl -a
outputs.source=dac
outputs.digital.source=dac
outputs.selector.mute=off
outputs.selector=119,119
outputs.master.mute=off
outputs.master=123,123
inputs.selector.source=mic1
outputs.headphones.boost=off
outputs.speaker.boost=off
outputs.mono.mute=off
outputs.mono=123
outputs.beep.mute=off
outputs.beep=85
inputs.usingdac=analog
record.usingadc=analog
$
==================================================
$ audioctl -a
name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:16
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=8704
hiwat=7
lowat=1
monitor_gain=0
mode=
play.rate=44100
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=174
play.balance=53
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=44100
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=179
record.balance=48
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
$
========================================
OpenBSD 4.1-current (GENERIC.MP) #1260: Fri Apr 6 01:51:07 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1071742976 (1046624K)
avail mem = 970452992 (947708K)
using 4278 buffers containing 53710848 bytes (52452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @
0xffa10, SMBIOS rev. 2.4 @ 0xf6df0 (64 entries)
bios0: Dell Inc. Latitude D820
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfa930/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc0000/0x10000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP HPET APIC ASF! MCFG SLIC TCPA SSDT
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus 12 (RP02)
acpiprt5 at acpi0: bus 9 (PXP0)
acpiprt6 at acpi0: bus 13 (RP04)
acpiprt7 at acpi0: bus 0 (RP05)
acpiprt8 at acpi0: bus 0 (RP06)
acpiac at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpitz at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 2 int 21 (irq 11)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 11
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 12
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 2 int 17 (irq 3), address 00:19:d2:bc:22:93
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01
pci4 at ppb3 bus 9
bge0 at pci4 dev 0 function 0 "Broadcom BCM5752" rev 0x02, BCM5752 A2
(0x6002): apic 2 int 18 (irq 5), address 00:19:b9:60:bc:91
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci5 at ppb4 bus 13
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2
int 20 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2
int 21 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2
int 22 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2
int 20 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci5 at ppb4 bus 13
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2
int 20 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2
int 21 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2
int 22 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2
int 20 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci6 at ppb5 bus 3
cbb0 at pci6 dev 1 function 0 vendor "O2 Micro", unknown product
0x7135 rev 0x21: apic 2 int 19 (irq 255)
vendor "O2 Micro", unknown product 0x00f7 (class serial bus subclass
Firewire, rev 0x02) at pci6 dev 1 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHW2080BH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-5540A, 102C> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub5 at uhub1 port 2
uhub5: Dell product 0xa005, rev 2.00/50.18, addr 2
uhub6 at uhub2 port 1
uhub6: vendor 0x0b97 product 0x7761, rev 1.10/1.10, addr 2
uhub6: 3 ports with 2 removable, bus powered
uhub5: 4 ports with 1 removable, self powered
ugen0 at uhub6 port 2
ugen0: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 3
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
didn't find Record format 6/16/1
===================================================
