You really need to run 4.1 on that machine; probably even with ACPI
enabled.
On Fri, Mar 23, 2007 at 01:32:33PM -0400, Frank Bax wrote:
> I installed 4.0 release on Dell Latitude D520 and found these issues:
>
> 1) Reboot will display messages about disk resync; monitor goes blank and
> then hangs until I press power off twice to reboot.
>
> 2) Laptop has a Core2Duo T5500 but only one processor is detected with MP
> kernel.
>
> 3) dmesg indicates Intel PRO/Wireless 3945ABG rev 0x02
> I downloaded wpi-firmware-1.13 and installed the package; but when I try
> to bring up the device:
> $ sudo ifconfig wpi0 up
> $ dmesg | tail
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: fatal firmware error
>
> I'm in the process of downloading current snapshot to see what happens.
>
> OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2506000a25
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1667 MHz (1292 mV): speeds: 1667, 1000 MHz
> real mem = 1063690240 (1038760K)
> avail mem = 962273280 (939720K)
> using 4256 buffers containing 53288960 bytes (52040K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/06, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.4 @ 0xf70c0 (61 entries)
> bios0: Dell Inc. Latitude D520
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaae0/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
> 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
> 0xeff00000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
> azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 11
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
> pci2 at ppb1 bus 12
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
> 11, address 00:19:d2:6a:e0:f3
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 3
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> pci3 at ppb2 bus 2
> bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 11,
> address 00:19:b9:53:ab:18
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cbb0 at pci3 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135
> rev 0x21: irq 5
> vendor "O2 Micro", unknown product 0x00f7 (class serial bus subclass
> Firewire, rev 0x02) at pci3 dev 1 function 4 not configured
> cbb0: bad Vcc request. sock_ctrl 0x501aa88, sock_status 0x50123e9
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD800BEVS-75RST0>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-T11N, A102> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> "unknown" at iic0 addr 0x18 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask efed netmask efed ttymask ffef
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub4 port 2
> uhub5: Dell product 0xa005, rev 2.00/50.18, addr 2
> uhub5: 4 ports with 0 removable, self powered, multiple transaction
> translators
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
> OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
> real mem = 1063690240 (1038760K)
> avail mem = 962215936 (939664K)
> using 4256 buffers containing 53288960 bytes (52040K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/06, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.4 @ 0xf70c0 (61 entries)
> bios0: Dell Inc. Latitude D520
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaae0/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
> 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
> 0xeff00000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
> azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci1 at ppb0 bus 11
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
> pci2 at ppb1 bus 12
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
> 11, address 00:19:d2:6a:e0:f3
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 3
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> pci3 at ppb2 bus 2
> bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 11,
> address 00:19:b9:53:ab:18
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cbb0 at pci3 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135
> rev 0x21: irq 5
> vendor "O2 Micro", unknown product 0x00f7 (class serial bus subclass
> Firewire, rev 0x02) at pci3 dev 1 function 4 not configured
> cbb0: bad Vcc request. sock_ctrl 0x501aa88, sock_status 0x50123e9
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD800BEVS-75RST0>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-T11N, A102> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> "unknown" at iic0 addr 0x18 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask efed netmask efed ttymask ffef
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub4 port 2
> uhub5: Dell product 0xa005, rev 2.00/50.18, addr 2
> uhub5: 4 ports with 0 removable, self powered, multiple transaction
> translators
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
