If you can help, please feel free to CC: me directly:
[EMAIL PROTECTED]
My partner-in-crime and I are having some trouble getting a LAN-to-LAN VPN
working with OpenBSD-4.0-stable isakmpd. Both firewalls have a relatively
unaltered install. Both firewalls still have pf, ipsec and isakmpd_flags
"unset" in rc.conf (we are configuring and starting manually - is this a
problem?). We have followed the directions from the "Zero to IPSec on 4
minutes" webpage. I hope that this error report is thorough.
Here is a picture of the configuration:
10.0.0.2/24 --- 10.0.0.1/24
L1 F1 F2 L2
10.4.14.1 --- 10.4.12.1/22 10.2.12.1/22 --- 10.2.14.1
L1,L2 - laptops
F1,F2 - Soekris net4801 firewalls
What works:
L1-F1 lan communication
L2-F2 lan communication
F1-F2 lan communication
F1-F2 IPSec communication (evidenced by F1 running "ping 10.0.0.1" and
seeing only esp packets in tcpdump)
What doesn't work:
F1-L2 gateway'd VPN
F2-L1 gateway'd VPN
L1-L2 gateway-to-gateway'd VPN
What is interesting is that the routing tables have a section named
"Encap:" that seem to contain valid routes for the flows that do not work
above, but when attempting to use "ping" on addresses on a broken flow we
get "No route to host". This has got to be something simple. Thanks in
advance for your help.
Here are the pf.conf files from both firewalls:
###########
F1: pf.conf
###########
# jack
ext_if="sis0"
int_if="sis1"
set skip on { lo $int_if enc0 }
nat on $ext_if from !($ext_if) -> ($ext_if:0)
block in
pass quick on $ext_if from 10.0.0.1
pass out keep state
pass in on $ext_if proto tcp to ($ext_if) port ssh keep state
###########
F2: pf.conf
###########
# sabino
ext_if="sis0"
int_if="sis1"
set skip on { lo $int_if enc0 }
nat on $ext_if from !($ext_if) -> ($ext_if:0)
block in
pass quick on $ext_if from 10.0.0.2
pass out keep state
pass in on $ext_if proto tcp to ($ext_if) port ssh keep state
##############
F1: ipsec.conf
##############
# jack to sabino
sabino_ext = "10.0.0.1"
sabino_int = "10.2.12.0/22"
jack_ext = "10.0.0.2"
jack_int = "10.4.12.0/22"
ike esp from $jack_int to $sabino_int peer $sabino_ext
ike esp from $jack_ext to $sabino_int peer $sabino_ext
ike esp from $jack_ext to $sabino_ext
##############
F2: ipsec.conf
##############
# sabino to jack
sabino_ext="10.0.0.1"
sabino_int="10.2.12.0/22"
jack_ext="10.0.0.2"
jack_int="10.4.12.0/22"
ike passive esp from $sabino_int to $jack_int peer $jack_ext
ike passive esp from $sabino_ext to $jack_int peer $jack_ext
ike passive esp from $sabino_ext to $jack_ext
###############################################################
F1: What isakmpd says after running ipsecctl -f /etc/ipsec.conf
###############################################################
# isakmpd -K -d -v
164953.991350 Default isakmpd: phase 1 done: initiator id 0a000002:
10.0.0.2, responder id 0a000001: 10.0.0.1, src: 10.0.0.2 dst: 10.0.0.1
164955.074708 Default isakmpd: quick mode done: src: 10.0.0.2 dst: 10.0.0.1
164955.283055 Default isakmpd: quick mode done: src: 10.0.0.2 dst: 10.0.0.1
164955.652188 Default isakmpd: quick mode done: src: 10.0.0.2 dst: 10.0.0.1
165058.199701 Default isakmpd: shutting down...
165058.219397 Default isakmpd: exit
###############################################################
F2: What isakmpd says after running ipsecctl -f /etc/ipsec.conf
###############################################################
# isakmpd -K -d -v
171251.878157 Default isakmpd: phase 1 done: initiator id 0a000002:
10.0.0.2, responder id 0a000001: 10.0.0.1, src: 10.0.0.1 dst: 10.0.0.2
171253.351373 Default isakmpd: quick mode done: src: 10.0.0.1 dst: 10.0.0.2
171253.557425 Default isakmpd: quick mode done: src: 10.0.0.1 dst: 10.0.0.2
171253.566780 Default isakmpd: quick mode done: src: 10.0.0.1 dst: 10.0.0.2
171356.739110 Default isakmpd: shutting down...
171356.741411 Default isakmpd: exit
##################################################
F1: routing table after isakmpd negotiates tunnels
##################################################
# ipsecctl -f /etc/ipsec.conf
# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu
Interface
10.0.0/24 link#1 UC 1 0 - sis0
10.0.0.1 00:00:24:c8:1d:60 UHLc 2 125 - sis0
10.4.12/22 link#2 UC 1 0 - sis1
10.4.14.1 00:e0:00:c2:6e:2c UHLc 4 644 - sis1
10.4.16/22 link#3 UC 0 0 - sis2
127/8 127.0.0.1 UGRS 0 0 33224 lo0
127.0.0.1 127.0.0.1 UH 1 4 33224 lo0
224/4 127.0.0.1 URS 0 0 33224 lo0
Internet6:
...abbreviated - irrelevant...
Encap:
Source Port Destination Port Proto
SA(Address/Proto/Type/Direction)
10.0.0.1/32 0 10.0.0.2/32 0 0 10.0.0.1/esp/use/in
10.0.0.2/32 0 10.0.0.1/32 0 0
10.0.0.1/esp/require/out
10.2.12/22 0 10.4.12/22 0 0 10.0.0.1/esp/use/in
10.4.12/22 0 10.2.12/22 0 0
10.0.0.1/esp/require/out
10.2.12/22 0 10.0.0.2/32 0 0 10.0.0.1/esp/use/in
10.0.0.2/32 0 10.2.12/22 0 0
10.0.0.1/esp/require/out
##################################################
F2: routing table after isakmpd negotiates tunnels
##################################################
# ipsecctl -f /etc/ipsec.conf
# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu
Interface
10.0.0/24 link#1 UC 1 0 - sis0
10.0.0.2 00:00:24:c8:1d:5c UHLc 1 11 - sis0
10.1.10.46 127.0.0.1 UGHS 0 0 33224 lo0
10.2.12/22 link#2 UC 1 0 - sis1
10.2.14.1 00:06:5b:d5:a8:a5 UHLc 3 680 - sis1
127/8 127.0.0.1 UGRS 0 0 33224 lo0
127.0.0.1 127.0.0.1 UH 2 0 33224 lo0
224/4 127.0.0.1 URS 0 0 33224 lo0
Internet6:
...abbreviated - irrelevant...
Encap:
Source Port Destination Port Proto
SA(Address/Proto/Type/Direction)
10.0.0.2/32 0 10.0.0.1/32 0 0 10.0.0.2/esp/use/in
10.0.0.1/32 0 10.0.0.2/32 0 0
10.0.0.2/esp/require/out
10.4.12/22 0 10.2.12/22 0 0 10.0.0.2/esp/use/in
10.2.12/22 0 10.4.12/22 0 0
10.0.0.2/esp/require/out
10.0.0.2/32 0 10.2.12/22 0 0 10.0.0.2/esp/use/in
10.2.12/22 0 10.0.0.2/32 0 0
10.0.0.2/esp/require/out
#########################
F1: attempting to ping L2
#########################
# ping 10.2.12.1
PING 10.2.12.1 (10.2.12.1): 56 data bytes
ping: sendto: No route to host
ping: wrote 10.2.12.1 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 10.2.12.1 64 chars, ret=-1
--- 10.2.12.1 ping statistics ---
2 packets transmitted, 0 packets received, 100.0% packet loss
#########################
F2: attempting to ping L1
#########################
# ping 10.4.14.1
PING 10.4.14.1 (10.4.14.1): 56 data bytes
ping: sendto: No route to host
ping: wrote 10.4.14.1 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 10.4.14.1 64 chars, ret=-1
--- 10.4.14.1 ping statistics ---
2 packets transmitted, 0 packets received, 100.0% packet loss
CHEERS!
--
Jack Bates
Placitas, NM, USA
I play Texas Hold'Em at http://www.fulltiltpoker.com
