> -----Original Message----- > From: Darrin Chandler [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 27, 2007 10:50 AM > To: Wade, Daniel > Cc: misc@openbsd.org > Subject: Re: Unsupported USB -> Serial Adapter > > On Tue, Feb 27, 2007 at 09:30:33AM -0500, Wade, Daniel wrote: > > Any chance this is supported by one of the existing driver, but just > > needs the ID to be added? > > > > port 2 addr 2: full speed, power 94 mA, config 1, USB Serial > > Adaptor(0x0080), Palm Computing, Inc.(0x0830), rev 1.00 > > Looks like it's already there. From /usr/src/sys/dev/usb/usbdevs: > > /* Palm Computing, Inc. product */ > product PALM SERIAL 0x0080 USB Serial Adaptor > > > That's from a 4.0-stable source tree. Can you supply a dmesg? >
I just noticed that myself. dmesg with device unplugged. I can get a dmesg with the device plugged in at boot later tonight. OpenBSD 4.1-beta (GENERIC.MP.acpi) #0: Thu Feb 22 12:27:00 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP.acpi real mem = 2137128960 (2087040K) avail mem = 1826136064 (1783336K) using 22937 buffers containing 213921792 bytes (208908K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6e60 (62 entries) bios0: Dell Inc. Latitude D620 acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP HPET APIC ASF! MCFG SLIC TCPA SSDT acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpihpet0 at acpi0 table HPET: 14318179 Hz acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.28 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST ,TM2,CX16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST ,TM2,CX16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpi device at acpi0 from table ASF! not configured acpi device at acpi0 from table MCFG not configured acpi device at acpi0 from table SLIC not configured acpi device at acpi0 from table TCPA not configured acpi device at acpi0 from table SSDT not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 0 (AGP_) acpiprt2 at acpi0: bus 3 (PCIE) acpiprt3 at acpi0: bus 11 (RP01) acpiprt4 at acpi0: bus 12 (RP02) acpiprt5 at acpi0: bus 9 (PXP0) acpiprt6 at acpi0: bus 0 (RP04) acpiprt7 at acpi0: bus 0 (RP05) acpiprt8 at acpi0: bus 0 (RP06) acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0: model: DELL RD3006 serial: 806 type: LION oem: Sanyo acpibat1 at acpi0: BAT1: not present acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpidock0 at acpi0: GDCK: not docked (0) acpitz0 at acpi0, critical temperature: 126 degC pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 21 (irq 10) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0 azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9 azalia0: codec[1]: No support for modem function groups azalia0: codec[1]: No audio function groups audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci1 at ppb0 bus 11 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 12 "Broadcom BCM4311" rev 0x01 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01 pci3 at ppb2 bus 9 bge0 at pci3 dev 0 function 0 "Broadcom BCM5752" rev 0x02, BCM5752 A2 (0x6002): apic 2 int 18 (irq 5), address 00:18:8b:aa:c2:61 brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 9) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 5) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 3) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 9) usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 3 cbb0 at pci4 dev 1 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x40: apic 2 int 18 (irq 255) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01 pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <Hitachi HTS721010G9SA00> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD+-RW DW-Q58A, UDS2> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 uhub5 at uhub0 port 2 uhub5: Dell product 0xa005, rev 2.00/50.18, addr 2 uhub5: 4 ports with 0 removable, self powered uhub6 at uhub5 port 3 uhub6: vendor 0x0b97 product 0x7761, rev 1.10/1.10, addr 3 uhub6: 3 ports with 2 removable, bus powered ugen0 at uhub6 port 1 ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 4 ugen1 at uhub6 port 2 ugen1: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 5 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302
