Hello misc@,
on my quest to promote OpenBSD I found a new user today, but we ran into
some issues concerning wpi.
The laptop is a "Dell Inspirion 6400".
With GENERIC[.MP]:
After uping wpi0 the machine completely freezes for a couple of seconds,
then accepts input every couple of seconds. There is no unusual
interrupt load coming from wpi.
The "funny" thing: If there is traffic on the ethernet (bce) the machine
becomes usable again.
With GENERIC[.MP] + ACPI:
There is no freeze and the card associates just fine with an UNENCRYPTED
(no WEP) and traffic can be pushed through it without issues.
ifconfig -M wpi works as well :)
BUT if WEP is enabled (right after typing ifconfig wpi0 nwkey
0xdeadbeef) the card stops working, with the message (in dmesg):
wpi0: fatal firmware error
wpi0: timeout waiting for adapter to initialize
It never associates with anything anymore until reboot.
Other issues the SD cards do not work:
sdmmc0: can't enable card
SpeedStep doesn't work with MP, regardless of ACPI.
Since this is not my laptop, testing patches will be delayed about 1 day
each time, but the newly converted OpenBSD user is willing to test them.
dmesg GENERIC:
OpenBSD 4.1-beta (GENERIC) #1376: Fri Feb 16 20:29:29 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063690240 (1038760K)
avail mem = 962134016 (939584K)
using 4256 buffers containing 53309440 bytes (52060K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf7980 (44 entries)
bios0: Dell Inc. MM061
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb010/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1800
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2c06000613
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xeff00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 11
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 4,
address 00:13:02:42:66:13
ppb1 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 4, address
00:14:22:d1:ca:81
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
"Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 1 function 0 not configured
sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: irq 11
sdmmc0 at sdhc0
"Ricoh 5C843" rev 0x01 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci3 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM080HI>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L532B, DE03> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 4
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dmesg GENERIC.MP:
OpenBSD 4.1-beta (GENERIC.MP) #1170: Fri Feb 16 20:44:31 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063690240 (1038760K)
avail mem = 962076672 (939528K)
using 4256 buffers containing 53309440 bytes (52060K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf7980 (44 entries)
bios0: Dell Inc. MM061
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb010/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1800
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xeff00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 11
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 4,
address 00:13:02:42:66:13
ppb1 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 4, address
00:14:22:d1:ca:81
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
"Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 1 function 0 not configured
sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: irq 11
sdmmc0 at sdhc0
"Ricoh 5C843" rev 0x01 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci3 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM080HI>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L532B, DE03> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 4
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
sdmmc0: can't enable card
dmesg GENERIC + ACPI:
OpenBSD 4.1-beta (GENERIC) #0: Wed Feb 21 11:48:10 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063690240 (1038760K)
avail mem = 962121728 (939572K)
using 4256 buffers containing 53309440 bytes (52060K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf7980 (44 entries)
bios0: Dell Inc. MM061
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb010/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1800
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table MCFG not configured
acpi device at acpi0 from table SLIC not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 0 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus 0 (RP02)
acpiprt5 at acpi0: bus 0 (RP03)
acpiprt6 at acpi0: bus 12 (RP04)
acpiprt7 at acpi0: bus 0 (RP05)
acpiprt8 at acpi0: bus 0 (RP06)
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0: model: DELLRD8506 serial: 2045 type: LION oem: SMP
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpitz0 at acpi0, critical temperature: 126 degC
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2c06000a2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1404 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xeff00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 11
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 11,
address 00:13:02:42:66:13
ppb1 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 4, address
00:14:22:d1:ca:81
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
"Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 1 function 0 not configured
sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: irq 11
sdmmc0 at sdhc0
"Ricoh 5C843" rev 0x01 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci3 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM080HI>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L532B, DE03> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 4
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dmesg GENERIC.MP + ACPI:
OpenBSD 4.1-beta (GENERIC.MP) #0: Wed Feb 21 11:53:12 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063690240 (1038760K)
avail mem = 962060288 (939512K)
using 4256 buffers containing 53309440 bytes (52060K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/18/06, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf7980 (44 entries)
bios0: Dell Inc. MM061
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb010/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1800
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
LAPIC: acpi_proc_id 0, apic_id 0, flags 0x1
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
LAPIC: acpi_proc_id 1, apic_id 1, flags 0x1
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
IOAPIC: acpi_ioapic_id 2, address 0xfec00000, global_int_base 0x0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
OVERRIDE: bus 0, source 0, global_int 2, flags 0
OVERRIDE: bus 0, source 9, global_int 9, flags d
LAPIC_NMI: acpi_proc_id 0, local_apic_lint 1, flags 5
LAPIC_NMI: acpi_proc_id 1, local_apic_lint 1, flags 5
acpi device at acpi0 from table MCFG not configured
acpi device at acpi0 from table SLIC not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 0 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus 0 (RP02)
acpiprt5 at acpi0: bus 0 (RP03)
acpiprt6 at acpi0: bus 12 (RP04)
acpiprt7 at acpi0: bus 0 (RP05)
acpiprt8 at acpi0: bus 0 (RP06)
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0: model: DELLRD8506 serial: 2045 type: LION oem: SMP
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpitz0 at acpi0, critical temperature: 126 degC
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
0xeff00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int
21 (irq 10)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Sigmatel STAC9220 (rev. 34.1), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 11
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
16 (irq 4), address 00:13:02:42:66:13
ppb1 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20
(irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21
(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22
(irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20
(irq 9)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: apic 2 int 17 (irq
4), address 00:14:22:d1:ca:81
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
"Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 1 function 0 not configured
sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: apic 2 int 18
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843" rev 0x01 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci3 dev 1 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM080HI>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L532B, DE03> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 17
(irq 4)
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ioapic0: pin 17 shares different IPL interrupts (40..50), degraded performance
ioapic0: pin 21 shares different IPL interrupts (40..90), degraded performance
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wpi0: fatal firmware error
wpi0: timeout waiting for adapter to initialize
wpi0: fatal firmware error
wpi0: timeout waiting for adapter to initialize
wpi0: fatal firmware error
wpi0: timeout waiting for adapter to initialize
Regards,
ahb
I do know that attachments will be stripped, but this makes CCing Marco
easier for me.
[demime 1.01d removed an attachment of type application/x-tar-gz]
