D. E. Evans wrote:
> On a Toshiba Satellite a35-s1593, without a PC-card currently plugged
> in, I get a mapping error for the CardBus (cbb). I intend to purchase
> a wireless PC-Card (I haven't decided on model yet), and wish to
> ensure it will work with the cardbus before doing so.
Try changing the BIOS for the CardBus slot to "Controlled by
OS" or other option.
My BIOS doesn't have that option. However, I set 0x0002 for pcibios
(with OpenBSD 4.0 now), and that allowed the cardbus to be assigned
an interupt. I have since been given a Linksys WPC11 v.4 PC Card,
which gives "not configured" on boot (see dmesg below). It appears
the host bridge pchb0 isn't recognized. Is there something else I
can do to configure this?
OpenBSD 4.0-stable (GENERIC) #12: Sun Feb 4 06:52:27 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 770142208 (752092K)
avail mem = 693952512 (677688K)
using 4256 buffers containing 38608896 bytes (37704K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dd) BIOS, date 07/22/04, BIOS32 rev. 0 @ 0xfd750,
SMBIOS rev. 2.31 @ 0xdf010 (31 entries)
bios0: TOSHIBA Satellite A35
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd750/0x8b0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
bios0: ROM list: 0xc0000/0xce00 0xcd000/0x1000 0xdf000/0x1000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xe8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 9
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 2
rl0 at pci1 dev 1 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:02:3f:ce:8c:30
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci1 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2412, 1015> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 10
iic0 at ichiic0
"unknown" at iic0 addr 0x18 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 10, ICH4
AC97
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
"Intel 82852GM Hub-PCI" rev 0x02 at cardbus0 dev 0 function 0 not configured
"Intel 82852GM Memory" rev 0x02 at cardbus0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at cardbus0 dev 0 function 3 not
configured
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
