[EMAIL PROTECTED] wrote:
Hi
I want to install OpenBSD 4.0 on a old sun sparc64 netra T1 105
the installing process works fine, but after reboot the system
i get a error mount_ffs: /dev/sd0a on /: Invalid argument (twice ???)
There nothing extra configured on the system except from the installing
script.
so what arguments are invalid
It isn't a hardware problem, installing freebsd give no problems at all (but i
want OpenBSD)
fsck give no errors
Do you have some clouse
Thnx
a OpenBSD fan
Some info
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.24 ME, 256 MB memory installed, Serial #11701099.
Ethernet address 8:0:20:b2:8b:6b, Host ID: 80b28b6b.
Executing last command: boot
Boot device: disk:c File and args:
OpenBSD IEEE 1275 Bootblock 1.1
..>> OpenBSD 4.0 (obj) #1: Sat Sep 16 23:33:01 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/stand/ofwboot/obj
<mailto:[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/stand/ofwboot/o
bj>
: trying bsd...
Booting /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0:c/bsd
[EMAIL PROTECTED]@[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]@[EMAIL PROTECTED]>
symbols @ 0xfea92280 58+279864+167637 start=0x1000000
[ using 448208 bytes of bsd ELF symbol table ]
console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],3803f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
<http://www.OpenBSD.org>
OpenBSD 4.0 (GENERIC) #953: Sun Sep 17 00:56:22 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
<mailto:[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC>
total memory = 268435456
avail memory = 234086400
using 1638 buffers containing 13418496 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL
PROTECTED],0:c
mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.011 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64
b/l)
psycho0 at mainbus0 addr 0xfffc0000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 1360000-13e0000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ipl 37
"SUNW,pll" at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34: polled
"fdthree" at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not
configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
"watchdog" at ebus0 addr 200000-20003f ipl 4 not configured
"display7seg" at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
"flashprom" at ebus0 addr 400000-5fffff not configured
"flashprom" at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ipl 40
iic0 at pcfiic0
pcfadc0 at iic0 addr 0x4f
"i2cpcf,8574a" at iic0 addr 0x38 not configured
"i2cpcf,8574a" at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ipl 27
iic1 at pcfiic1
"SUNW,lom" at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:b2:8b:6b
luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec 0x7e0,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2 0/direct
fixed
sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2 0/direct
fixed
sd1: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7da, address
08:00:20:b2:8b:6b
luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7c2 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
root on sd0c
^^^^^^^^^^^^ see below
</snipped>
#cat /etc/fstab
/dev/sd0a / ffs rw 1 2
</snipped>
Hi,
Looks like you messed up the installation some how:
Why is root on sd0c? c is the raw whole disk it should be sd0a.
Also your fstab has a fs_passno of 2 for the root device this should be
1 - see fstab(5)
HTH
Fred
--
OpenBSD on the Zaurus C3200
http://www.crowsons.net/puters/zaurus.php
