On Thu, 2007-01-25 at 14:04 +0100, Jules Colding wrote: > Hi, > > I'm trying to install OpenBSD 4.0 on a Soekris net4801 but I just can't > complete the install. I'm stalled when the install attempts to write the > new partitions to the disk. It fails with: > > "mount_ffs: /dev/wd0a on /mnt: Invalid argument"
BTW, disklabel wd0 says: # disklabel wd0 # Inside MBR partition 3: type A6 start 63 size 78107967 # /dev/rwd0c: type: ESDI disk: ESDI/IDE disk label: .T94813A flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 16 sectors/cylinder: 1008 cylinders: 16383 total sectors: 78123776 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 1048257 63 4.2BSD 2048 16384 328 # Cyl 0*- 1039 b: 1048320 1048320 swap # Cyl 1040 - 2079 c: 78123776 0 unused 0 0 # Cyl 0 - 77503* d: 524160 2096640 4.2BSD 2048 16384 328 # Cyl 2080 - 2599 e: 262080 2620800 4.2BSD 2048 16384 260 # Cyl 2600 - 2859 g: 25165728 2882880 4.2BSD 2048 16384 328 # Cyl 2860 - 27825 h: 25165728 28048608 4.2BSD 2048 16384 328 # Cyl 27826 - 52791 -- jules