Running a -current i386 MP kernel and trying to add an sk nic got me the
following errors:
sk0: watchdog timeout
sk0: cannot stop transfer of Tx descriptors
sk0: cannot stop transfer of Rx descriptors
Everything is working fine with the onboard em0 but this is interesting:
ioapic0: pin 17 shares different IPL interrupts (40..50), degraded
performance
Is this something to be concerned about?
Jeff
full dmesg:
OpenBSD 4.0-current (GENERIC.MP) #26: Wed Jan 17 18:21:35 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2146988032 (2096668K)
avail mem = 1950171136 (1904464K)
using 4256 buffers containing 107474944 bytes (104956K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/09/05, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.3 @ 0xf82a0 (48 entries)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2ff0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x400! 0xc8800/0x1800
0xca000/0x2200 0xcc800/0x1800
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 2
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 4
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82545EM)" rev 0x01: apic
10 int 0 (irq 10), address 00:e0:81:28:e9:71
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 9
int 0 (irq 10)
ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 70006MB, 70006 cyl, 64 head, 32 sec, 512 bytes/sec, 143372288 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <SUPER, GEM318, 0> SCSI2 3/processor fixed
ami1 at pci3 dev 6 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 9
int 4 (irq 10)
ami1: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM
ami1: 1 channels, 0 FC loops, 0 logical drives
scsibus2 at ami1: 40 targets
scsibus3 at ami1: 16 targets
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 1
fxp0 at pci4 dev 1 function 0 "Intel 8255x" rev 0x10, i82551: apic 8 int
17 (irq 9), address 00:e0:81:28:e9:70
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci4 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci4 dev 3 function 0 "D-Link Systems DGE-530T A1" rev 0x11,
Yukon (0x1): apic 8 int 18 (irq 0)
sk0 at skc0 port A, address 00:13:46:72:3e:8f
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <SONY, DVD RW DW-D22A, BYS2> SCSI0 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
apic 8 int 17 (irq 0)
iic0 at ichiic0
lm1 at iic0 addr 0x29: W83782D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
ioapic0: pin 17 shares different IPL interrupts (40..50), degraded
performance
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
sk0: watchdog timeout
sk0: cannot stop transfer of Tx descriptors
sk0: cannot stop transfer of Rx descriptors
