Tiago Marques wrote:
> For all those interested, here goes the dmesg of OpenBSD 4.0 running on a
> Asus M2NPV-VM board with AMD64 X2 4200+ EE and 1GB DDR2 667MHz.
>
> SATA and Network OK.
>
> Only problem is with X, mouse not working.
> Just installed it though, so haven't tweaked anything.
>
> BTW, put the BIOS Plug&Play OS in NO, for it to boot.
>
> Best regards,
> Tiago Marques
>
>
I just built a small server using this same board. I haven't tried X so
I can't speak to the mouse issue but in all the respects that matter to
me it's a huge improvement over my previous board the Asus A8N-SLI
Premium. (The A8N had really crappy SATA performance.) Following is my
dmesg using GENERIC.MP kernel from the 4.0 i386 tree with raidframe
compiled in. No other options were changed.
One of the things I like about this mobo is two on-board serial ports.
At least one serial port was high on my list for the UPS, two is a bonus.
It also has good hw.sensors support and, IIRC, 3 on board fan plugs in
addition to the cpu fan. No watchdogd support, though.
hw.sensors.0=it0, Fan1, 2800 RPM
hw.sensors.2=it0, Fan3, 19852 RPM
hw.sensors.3=it0, VCORE_A, 1.14 V DC
hw.sensors.4=it0, VCORE_B, 3.15 V DC
hw.sensors.5=it0, +3.3V, 0.00 V DC
hw.sensors.6=it0, +5V, 4.73 V DC
hw.sensors.7=it0, +12V, 11.46 V DC
hw.sensors.8=it0, Unused, -8.60 V DC
hw.sensors.9=it0, -12V, -17.00 V DC
hw.sensors.10=it0, +5VSB, 4.57 V DC
hw.sensors.11=it0, VBAT, 2.85 V DC
hw.sensors.12=it0, Temp 1, 29.00 degC
hw.sensors.13=it0, Temp 2, 37.00 degC
hw.sensors.14=it0, Temp 3, 25.00 degC
This board has some nice multi-media features and could be a good freevo
box or workstation in addition to my implementation as a light-duty
server. I picked it up for US$99 at Frys.
Aaron
OpenBSD 4.0 (GENERIC.RAID.MP) #0: Sat Jan 6 22:13:57 CST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.RAID.MP
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ ("AuthenticAMD"
686-class, 512KB L2 cache) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
real mem = 1038643200 (1014300K)
avail mem = 938905600 (916900K)
using 4256 buffers containing 52035584 bytes (50816K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(41) BIOS, date 11/29/06, BIOS32 rev. 0 @
0xf1fc0, SMBIOS rev. 2.4 @ 0xf0000 (67 entries)
bios0: ASUSTek Computer INC. M2NPV-VM
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdef4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde00/240 (13 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 13 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000!
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 503 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ ("AuthenticAMD"
686-class, 512KB L2 cache) 5.04 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not configured
ppb0 at pci0 dev 2 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci2 at ppb1 bus 2
ppb2 at pci0 dev 4 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci3 at ppb2 bus 3
vga1 at pci0 dev 5 function 0 "NVIDIA GeForce 6150" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP51 Host" rev 0xa2 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP51 ISA" rev 0xa3
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP51 SMBus" rev 0xa3
iic0 at nviic0
iic1 at nviic0
"NVIDIA MCP51 Memory" rev 0xa3 at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP51 USB" rev 0xa3: apic 2 int
5 (irq 5), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP51 USB" rev 0xa3: apic 2 int
11 (irq 11)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP51 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6L250R0>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-510A, 1.0a> SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP51 SATA" rev 0xa1: DMA
pciide1: using apic 2 int 5 (irq 5) for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST3500641AS>
wd1: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <ST3500641AS>
wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 15 function 0 "NVIDIA MCP51 SATA" rev 0xa1: DMA
pciide2: using apic 2 int 5 (irq 5) for native-PCI interrupt
wd3 at pciide2 channel 1 drive 0: <ST3500641AS>
wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd3(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5
ppb3 at pci0 dev 16 function 0 "NVIDIA MCP51 PCI-PCI" rev 0xa2
pci4 at ppb3 bus 4
"TI TSB43AB22 FireWire" rev 0x00 at pci4 dev 5 function 0 not configured
azalia0 at pci0 dev 16 function 1 "NVIDIA MCP51 HD Audio" rev 0xa2: apic
2 int 5 (irq 5)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x11d4 (rev. 5.0), HDA version 1.0
audio0 at azalia0
nfe0 at pci0 dev 20 function 0 "NVIDIA MCP51 LAN" rev 0xa3: apic 2 int
11 (irq 11), address 00:17:31:6f:3c:ca
eephy0 at nfe0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 1
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pmsattach: disable error
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
ioapic0: pin 5 shares different IPL interrupts (40..90), degraded
performance
ioapic0: pin 11 shares different IPL interrupts (40..50), degraded
performance
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
apm0: disconnected
umass0 at uhub1 port 7 configuration 1 interface 0
umass0: Atech Flash PRO-Gear XM-4U, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader CF, 0100> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <USB2.0, CardReader SM XD, 0100> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <USB2.0, CardReader MS, 0100> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <USB2.0, CardReader SD, 0100> SCSI0
0/direct removable
sd3: drive offline
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
raid0: Component /dev/wd1a being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 3
Version: 2 Serial Number: 20070107 Mod Counter: 54
Clean: Yes Status: 0
raid0: Component /dev/wd2a being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 3
Version: 2 Serial Number: 20070107 Mod Counter: 54
Clean: Yes Status: 0
raid0: Component /dev/wd3a being configured at row: 0 col: 2
Row: 0 Column: 2 Num Rows: 1 Num Columns: 3
Version: 2 Serial Number: 20070107 Mod Counter: 54
Clean: Yes Status: 0
WARNING: truncating disk at r 0 c 1 to 976767938 blocks.
raid0 (root)nfe0: watchdog timeout
