Tjenare,
So, I received this 256MB USB flash disk today just to find out that I
can't use it in my favourite OS. I figure I could send it to one of the
developers, if someone is interested, but before going down that road
perhaps there is someone at @misc that have a suggestion on how I can
get the device to work? Perhaps the disk should work as it is now, I
just need to tell the OS what the device really is?
With the drive there was a flyer saying that driver for Windows 98 (!)
can be found at www.nomenta.com/support which is a bad site that I can't
use since I don't have any of those plugins installed.
This is what I get when I plug it in:
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: vendor 0x0204 product 0x6025, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 2.00> SCSI2 0/direct
removable
sd0: drive offline
This is what hotplugd says:
hotplugd[1128]: sd0 attached, class 2
hotplugd[1128]: scsibus1 attached, class 0
hotplugd[1128]: umass0 attached, class 0
And here is the dmesg:
OpenBSD 4.0-current (GENERIC) #5: Mon Dec 18 19:53:37 CET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 1000MHz ("GenuineIntel"
686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267808768 (261532K)
avail mem = 236417024 (230876K)
using 3299 buffers containing 13512704 bytes (13196K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 12/31/03, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xfc087 (37 entries)
bios0: Compaq Evo N600c
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 96%
apm0: AC on, battery charge high
apm0: flags 130102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0a00/272 (15 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5280/272 (15 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CAM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 3 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 3 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 4 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VM" rev 0x42, i82562: irq
11, address 00:02:a5:b8:71:b5
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
esa0 at pci2 dev 9 function 0 "ESS ES1989" rev 0x12: irq 11
ac97: codec id 0x45838308 (ESS Technology ES1921)
ac97: codec features 20 bit DAC, 20 bit ADC, ESS Technology
audio0 at esa0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS548080M9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, DVD-ROM DRN8080B, 2.18> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef4d netmask ef4d ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ral0 at cardbus1 dev 0 function 0: irq 11, address 00:13:f7:1e:a7:86
ral0: MAC/BBP RT2661B, RF RT2529 (MIMO XR)
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
