On Fri, Dec 22, 2006 at 02:35:00AM -0800, Brian Keefer wrote:
> Not sure if anyone else has noticed, but VMware finally released
> Fusion for public beta. It's the port to Macintel.
>
> Only caveat so far is that Fusion wouldn't mount the OpenBSD CDs. I
> think it might have a problem mounting volumes that have spaces in
> the path. I downloaded cd40.iso and did an FTP install and that
> worked fine (NAT for networking, choose dhcp during the install since
> it doesn't have any way that I could find to configure vmnet).
>
> Here're the dmesg's from RAMDISK_CD and GENERIC.MP on a MBP 15"
> CoreDuo 2.16GHz:
>
can you try 4.0-current (or a recent snapshot)? it should use the new
vic(4) driver instead of pcn(4).
> OpenBSD 4.0 (RAMDISK_CD) #39: Sat Sep 16 19:34:26 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class)
> 2.19 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
> ,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3
> real mem = 267939840 (261660K)
> avail mem = 238141440 (232560K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(2b) BIOS, date 12/06/06, BIOS32 rev. 0 @
> 0xfd880, SMBIOS rev. 2.31 @ 0xe0010 (45 entries)
> bios0: VMware, Inc. VMware Virtual Platform
> apm0 at bios0: Power Management spec V1.2
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev
> 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
> 0xe0000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
> wd0: 64-sector PIO, LBA, 8192MB, 16777216 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00>
> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Intel 82371AB Power" rev 0x08 at pci0 dev 7 function 3 not configured
> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> bha3 at pci0 dev 16 function 0 "BusLogic MultiMaster" rev 0x01: irq
> 11, BusLogic 9xxC SCSI
> bha3: model BT-958, firmware 5.07B
> bha3: sync, parity
> scsibus1 at bha3: 8 targets
> ppb1 at pci0 dev 17 function 0 vendor "VMware", unknown product
> 0x0790 rev 0x01
> pci2 at ppb1 bus 2
> pcn0 at pci2 dev 0 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
> Am79c970A, rev 0: irq 9, address 00:0c:29:c9:d7:96
> "Ensoniq AudioPCI97" rev 0x02 at pci2 dev 1 function 0 not configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask fde5 netmask ffe5 ttymask ffe7
> rd0: fixed, 3800 blocks
> wd0: no disk label
> dkcsum: wd0 matches BIOS drive 0x80
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> wd0: no disk label
> syncing disks... done
> rebooting...
> OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class)
> 2.17 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
> ,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3
> real mem = 267939840 (261660K)
> avail mem = 236609536 (231064K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(4a) BIOS, date 12/06/06, BIOS32 rev. 0 @
> 0xfd880, SMBIOS rev. 2.31 @ 0xe0010 (45 entries)
> bios0: VMware, Inc. VMware Virtual Platform
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev
> 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
> 0xe0000/0x4000!
> mainbus0: Intel MP Specification (Version 1.4) (INTEL 440BX )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: unknown Core FSB_FREQ value 0 (0x0)
> cpu0: apic clock running at 66 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class)
> 2.17 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
> ,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type ISA
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
> wd0: 64-sector PIO, LBA, 8192MB, 16777216 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00>
> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08:
> SMBus disabled
> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> bha3 at pci0 dev 16 function 0 "BusLogic MultiMaster" rev 0x01: apic
> 2 int 17 (irq 11), BusLogic 9xxC SCSI
> bha3: model BT-958, firmware 5.07B
> bha3: sync, parity
> scsibus1 at bha3: 8 targets
> ppb1 at pci0 dev 17 function 0 vendor "VMware", unknown product
> 0x0790 rev 0x01
> pci2 at ppb1 bus 2
> pcn0 at pci2 dev 0 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
> Am79c970A, rev 0: apic 2 int 18 (irq 9), address 00:0c:29:c9:d7:96
> eap0 at pci2 dev 1 function 0 "Ensoniq AudioPCI97" rev 0x02: apic 2
> int 19 (irq 10)
> ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
> audio0 at eap0
> midi0 at eap0: <AudioPCI MIDI UART>
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask 0 netmask 0 ttymask 0
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> apm0: disconnected
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> cpu1: unknown Core FSB_FREQ value 0 (0x0)
>
> Brian Keefer
> www.Tumbleweed.com
> "The Experts in Secure Internet Communication"
