I am having trouble getting tightvnc-1.2.9 working for amd64. The
server starts with this error shown in the log file:
Getting interface configuration (4): Device not configured
18/12/06 10:18:33 Xvnc version 3.3.tight1.2.9
-----------------8<-------------------8<----------------------
xrdb: Can't open display ':1'
xsetroot: unable to open display ':1'
twm: unable to open display ":1"
xterm Xt error: Can't open display: :1
If I kill the server Xvnc will core dump. Searching the mailing list
archives did not yield any results (at least with the search terms I
used). After googling around, it seems that "Getting interface
configuration (4): Device not configured" is an important item. The
pages I read claim that there are some alignment issues with 64-bit
flavors and with the system called used before that error. I have no
idea if OpenBSD 4.0 AMD64 is susceptible to that. Odds are I'm doing
something stupid somewhere, but I cannot figure it out.
Relevant information attached below.
Thanks in advanced,
Chris
OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1038610432 (1014268K)
avail mem = 877838336 (857264K)
using 22937 buffers containing 104067072 bytes (101628K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (35 entries)
bios0: Winfast K8M890-8237
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3200+, 2000.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: PowerNow! K8 2000 Mhz: speeds: 2000 1800 1000 Mhz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x0336 rev
0x00
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1336 rev
0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2336 rev
0x00
pchb3 at pci0 dev 0 function 3 vendor "VIA", unknown product 0x3336 rev
0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4336 rev
0x00
vendor "VIA", unknown product 0x5336 (class system subclass interrupt,
rev 0x00) at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7336 rev
0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "VIA", unknown product 0x3230 rev
0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
dc0 at pci0 dev 5 function 0 "Lite-On PNIC" rev 0x20: irq 5, address
00:a0:cc:50:f6:74
bmtphy0 at dc0 phy 1: BCM5201 10/100 PHY, rev. 2
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:15:58:6d:5a:1c
rlphy0 at rl0 phy 0: RTL internal PHY
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD1600JS-00NCB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <WDC WD1600KS-00MJB0>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <RICOH, DVD+RW MP5125, 1.72> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 7
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 7
ac97: codec id 0x414c4761 (Avance Logic ALC655 rev 1)
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
umass0 at uhub4 port 3 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr
2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WDC WD32, 00JB-00KFA0, 0 0> SCSI0
0/direct fixed
sd0: 305245MB, 305245 cyl, 64 head, 32 sec, 512 bytes/sec, 625142448 sec
total
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: Hewlett-Packard DeskJet 930C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dc0: failed to force tx and rx to idle state
