Hi,
I am getting no sound out of this board (ASUSTeK Computer INC. P5AD2-E-Premium)
with OpenBSD 4.0.
See dmesg for azalia error during boot:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID
real mem = 1072984064 (1047836K)
avail mem = 970764288 (948012K)
using 4256 buffers containing 53751808 bytes (52492K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/23/05, BIOS32 rev. 0 @ 0xf0010, SMB
IOS rev. 2.3 @ 0xf04d0 (79 entries)
bios0: ASUSTeK Computer INC. P5AD2-E-Premium
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8160/352 (20 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xee00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82925X MCH Host" rev 0x0e
ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x0e
pci1 at ppb0 bus 5
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: CMedia CMI9880 (rev. 0.2), HDA version 0.9
azalia0: /usr/src/sys/dev/pci/azalia.c/1159 invalid PCM format: 0x00000000
delete_encodings...
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell Yukon-2
EC rev. A2 (0x1): irq 10
msk0 at mskc0 port A, address 00:11:d8:46:6f:bc
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04
pci4 at ppb3 bus 2
mskc1 at pci4 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell Yukon-2
EC rev. A2 (0x1): irq 5
msk1 at mskc1 port A, address 00:11:d8:46:6a:42
eephy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd4
pci5 at ppb4 bus 1
vendor "TI", unknown product 0x8025 (class serial bus subclass Firewire, rev 0x0
1) at pci5 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-108, 1.20> SCSI0 5/cdrom remo
vable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x04: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 3 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD740GD-00FLA0>
wd0: 16-sector PIO, LBA48, 70911MB, 145226112 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD1600YD-01NVB1>
wd1: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD740GD-50FLA2>
wd2: 16-sector PIO, LBA48, 70911MB, 145226112 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 3
iic0 at ichiic0
lm1 at iic0 addr 0x2f: W83791SD
"unknown" at iic0 addr 0x4e not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhidev0 at uhub1 port 2 configuration 1 interface 0umass0 at uhub3 port 1 config
uration 1 interface 0
uhidev0: Razer Razer 1600dpi Mouse, rev 2.00/23.00, addr 2, iclass 3/1
umass0: vendor 0x058f USB Reader, rev 1.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
ums0 at uhidev0: 7 buttons and Z dir.
wsmouse0 at ums0 mux 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct remo
vable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct remo
vable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct remo
vable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct remo
vable
sd3: drive offline
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x82
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x80
root on wd2a
rootdev=0x20 rrootdev=0x320 rawdev=0x322
