2006/11/23, Berk D. Demir <[EMAIL PROTECTED]>:
Destroy your gre tunnel with
ifconfig gre0 down
ifconfig gre0 destroy
Done.
Clear your ARP table.
arp -ad
Done.
Try to reach 192.50.51.28. For example with ping or telnet to port 22.
Then check arp table entry
arp 192.50.51.28
It's work as expected, MAC is correct too.
If it's OK. Try again. It could be an outdated ARP entry.
Nothing changes with time.
After creating gre0 if, clear the arp table again. It should resolve to
the same MAC. If not, yes you've found a weird bug. (I don't guess so)
Some mystic is here. I clearing arp table and then create gre0. Even
without any my activity I see both 192.50.51.28 and 192.50.51.29 (with
correct MACs) in ARP table. But ping through tunnel gives the same
result (sending IP packet to 192.50.51.28 using MAC from
192.50.51.29).
But if I clear ARP table again (arp -ad, after gre0 creation) all
begins to work. And there is no more MAC of 192.50.51.29 in my ARP
table. Maybe it's not so weird bug but not expected behaviour anyway.
Thanks for hint about clearing of ARP table!
By looking at MAC's OUI part,
192.50.51.29 @ 00:16:cb:a2:8e:c5 seems like an Apple machine.
Yes, it's Intel Mac.
192.50.51.28 @ 00:e0:4d:02:d6:0e seems like an Internet Initiative
Japan's Machine or Ethernet card. (could be an nvidia nforce or an old
realtek card too)
PC with Realtek 8139 or similar.
BTW, it'll be better to specify your version, your network cards, your
architecture. Attaching a dmesg is way simpler.
No problem. Dmesg is following:
----------------------------------------------------------------------------------------------------------
OpenBSD 4.0 (GENERIC.RAID) #1: Sun Nov 5 02:10:37 YEKT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.RAID
cpu0: Intel(R) Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,S
SE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 536379392 (523808K)
avail mem = 480911360 (469640K)
using 4256 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(34) BIOS, date 07/03/03, BIOS32 rev. 0 @
0xf9760, SMBIOS rev. 2.3 @ 0xf0120
(38 entries)
bios0: Gigabyte Technology Co., Ltd. 8IEXRR
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc154
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc060/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82545GM)" rev 0x04:
irq 11, address 00:04:23:ce:bb:b4
fxp0 at pci2 dev 6 function 0 "Intel 8255x" rev 0x0d, i82550: irq 10,
address 00:0d:61:4b:12:20
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 8255x" rev 0x0d, i82550: irq 11,
address 00:0d:61:4b:12:21
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibility,
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120022A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD-ROM SDR-083, MX13> SCSI0
5/cdrom removable
wd1 at pciide0 channel 1 drive 1: <ST3120022A>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 11
iic0 at ichiic0
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 20971264 (10239 MB)
raid1 (root): (RAID Level 1) total number of sectors is 104857088 (51199 MB)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
