I've just installed OBSD current on a PIII Dell piece o' junk lying
around here
dmesg below ... xorgcfg works wonderful, but startx quits like it
shows below.
Would love to tell X "Hey, use whatever you used for xorgcfg because
that works
perfectly!"
--- startx error msg ---
xauth: creating new authority file /root/.serverauth.2993
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't
already running
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
giving up.
/usr/X11R6/bin/xinit: Connection refused (errno 61): unable to
connect to X server
/usr/X11R6/bin/xinit: No such process (errno 3): unexpected signal 2.
--- dmesg ---
OpenBSD 4.0-current (GENERIC) #1208: Fri Nov 10 15:25:11 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 648 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 536289280 (523720K)
avail mem = 481206272 (469928K)
using 4256 buffers containing 26939392 bytes (26308K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/05/03, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf6d60 (58 entries)
bios0: Dell Computer Corporation Latitude CPx J650GT
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbd20/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE"
rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "TI PCI1225 CardBus" rev 0x01: irq 11
cbb1 at pci0 dev 3 function 1 "TI PCI1225 CardBus" rev 0x01: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-220>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, q008> SCSI0 5/
cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev 0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef4d netmask ef4d ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dc0 at cardbus1 dev 0 function 0 "NETGEAR, Inc., FA511, CardBus
Mobile Adapter" irq 11 address 00:10:7a:69:56:71
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Jack J. Woehr
Director of Development
Absolute Performance, Inc.
[EMAIL PROTECTED]
303-443-7000 ext. 527
