Hi,
Here is two dmegs from two identically pcengines WRAP 2E boxes that
until today had lm77-sensors providing the temperature, but today on of
them don't and I get this:
< "unknown" at iic1 addr 0x48 not configured
---
> lmtemp0 at iic1 addr 0x48: lm77
Is this a hardware failure?? Other than this they are both working fine.
/Rickard.
OpenBSD 3.9 (WRAP12) #0: Mon Sep 4 17:45:51 CEST 2006
[EMAIL PROTECTED]:/home/rd/flashboot/flashboot/obj/WRAP12
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133804032 (130668K)
avail mem = 108634112 (106088K)
using 331 buffers containing 1355776 bytes (1324K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 05/02/05, BIOS32 rev. 0 @ 0xfc5f2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:0d:b9:01:91:7c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 15 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 9,
address 00:0d:b9:01:91:7d
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11,
address 00:0d:b9:01:91:7e
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <STI Flash 7.2.0>
wd0: 1-sector PIO, LBA, 122MB, 250880 sectors
wd0(pciide0:0:0): using PIO mode 4
"NS SCx200 AUDIO" rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3
wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 9, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
"unknown" at iic1 addr 0x48 not configured
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask f3ef netmask ffef ttymask ffef
rd0: fixed, 30720 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
clock: unknown CMOS layout
OpenBSD 3.9 (WRAP12) #0: Mon Sep 4 17:45:51 CEST 2006
[EMAIL PROTECTED]:/home/rd/flashboot/flashboot/obj/WRAP12
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133804032 (130668K)
avail mem = 108634112 (106088K)
using 331 buffers containing 1355776 bytes (1324K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 05/02/05, BIOS32 rev. 0 @ 0xfc5f2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:0d:b9:01:94:ec
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 15 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 9,
address 00:0d:b9:01:94:ed
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11,
address 00:0d:b9:01:94:ee
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <STI Flash 7.2.0>
wd0: 1-sector PIO, LBA, 122MB, 250880 sectors
wd0(pciide0:0:0): using PIO mode 4
"NS SCx200 AUDIO" rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3
wdstatus 9<WDRST,WDOVF>
isa0 at gscpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
lmtemp0 at iic1 addr 0x48: lm77
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask f1ef netmask ffef ttymask ffef
rd0: fixed, 30720 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
clock: unknown CMOS layout
